打开APP
userphoto
未登录

开通VIP,畅享免费电子书等14项超值服

开通VIP
linux/centos如何查看网卡是100M还是1000M?
 

linux/centos如何查看网卡是100M还是1000M?检查100兆还是千兆(1GBPS)带宽接入

来源: 季磊的日志

如何不被忽悠?linux/centos如何查看网卡是100M还是1000M?检查100兆还是千兆(1GBPS)带宽接入,请看下面命令

 

[root@www.ctohome.com]# mii-tool -V
mii-tool.c 1.9 2000/04/28 00:56:08 (David Hinds)
SIOCGMIIREG on eth0 failed: Input/output error
eth0: negotiated 100baseTx-FD, link ok
[root@www.ctohome.com]# mii-tool -v
SIOCGMIIREG on eth0 failed: Input/output error
eth0: negotiated 100baseTx-FD, link ok
product info: vendor 00:aa:00, model 57 rev 0
basic mode:   autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
[root@www.ctohome.com]# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes:   10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes:  10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbag
Wake-on: g
Current message level: 0×00000001 (1)
Link detected: yes

 

要测试是否是1000M端口,最保险的说用wget测试一个对方的带宽足够大的下载地址:

wget http://cachefly.cachefly.net/100mb.test
–2011-03-14 22:19:12–  http://cachefly.cachefly.net/100mb.test
Resolving cachefly.cachefly.net… 205.234.175.175
Connecting to cachefly.cachefly.net|205.234.175.175|:80… connected.
HTTP request sent, awaiting response… 200 OK
Length: 104857600 (100M) [application/octet-stream]
Saving to: `100mb.test.2′

100%[===================================================================================================================>] 104,857,600 39.1M/s   in 2.6s

2011-03-14 22:19:14 (39.1 MB/s) – `100mb.test.2′ saved [104857600/104857600]

如果下载速度能超过15MB/s,那么不是100M端口了,通常就是1000M端口

如果是独立服务器,可以通过下面命令核查网卡端口:
[root@www.ctohome.com ]# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes:   10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes:  10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbag
Wake-on: g
Current message level: 0×00000001 (1)
Link detected: yes

本站仅提供存储服务,所有内容均由用户发布,如发现有害或侵权内容,请点击举报
打开APP,阅读全文并永久保存 查看更多类似文章
猜你喜欢
类似文章
【热】打开小程序,算一算2024你的财运
mii
linux服务器网卡驱动安装及故障排除2
linux物理网卡检测命令mii
linux 测试网速的相关工具
Linux下调整网卡的工作模式
Linux 查看系统硬件信息(实例详解)
更多类似文章 >>
生活服务
热点新闻
分享 收藏 导长图 关注 下载文章
绑定账号成功
后续可登录账号畅享VIP特权!
如果VIP功能使用有故障,
可点击这里联系客服!

联系客服