本指标包含阴线回调的预选指标（收盘后选），阳包阴启动指标（早盘开盘开始预警，）也可把 阳包阴预选 的回调预选的指标在盘后在条件预警里面的设置时间段预警（15:00----20:00），有符合阴线回调的个股会预警并自动存入 提前新建的 阳包阴预选 股池 的子版块当中去。
有回调预选信号，并不代表第二天立马就反转。有些后面会继续回调，如果回调幅度不大，并且在均线密集处有止跌信号的小K线，后续可等放量的阳量K线，成交量稍微大于前一日成交量（换手率），涨幅在3.5%以下时 尾盘试仓介入。本指标只适于通达信版本的软件，以打板为主，反包阴线实体时半路为辅。
对指标的风险方面的提示是：不做秒板，就是 厂字型 拉板的不做，特别是那种无量拉板的那种更要回避。只一种秒拉上去的情况方可适当参与打板，就是跳空高开2.5%--6.5%之间的涨幅时，开盘价跳过前一日的阴线实体。比如这次12月8日的601015陕西黑猫就是这样打板操作的，早盘高开后稍微回调蓄势，等反转当时的分时高点后准备做打板。
打板的个股最好是等9:40分钟之后的板再打，其他模式的打板也适用。首板的秒板的盈亏比在情绪开始衰退期时是很差的也是资金大回撤的根源。二板打板才需根据 早盘的开盘涨幅、竞价换手、量比、竞价、位置、题材、板块热度多方衡量后做秒板的打板，本指标是首板，不是二板哦。
本指标都是加密处理的，可看贴图中的信号位置，如有朋友想再提升优化，需要源码的话可在元旦后订阅差异化的有偿指标。
这个指标包含：阳包阴预选的选股、副图，以及阳包阴打板、副图。
{公式名称: 阳包阴预选
公式描述:
无参数
公式类型: 技术指标公式-其他类型
画线方法: 副图
公式版本: 0
显示小数: 缺省位数
坐标线位置: 自动
额外Y轴分界: 无
参数精灵:无
用法注释:无
公式源码:}
X_1:=IF(CLOSE>=OPEN OR (CLOSE=OPEN AND CLOSE>=REF(CLOSE,1)),VOL,0);
X_2:=IF(CLOSE<OPEN OR (CLOSE=OPEN AND CLOSE<REF(CLOSE,1)),VOL,0);
X_3:=SUM(X_1,65);
X_4:=SUM(X_2,65);
X_5:=X_3>X_4*1.2 OR COUNT(EVERY(CLOSE>=OPEN,4),65)>=3;
X_6:=LLV(LOW,4);
X_7:=REF(LLV(CLOSE,26),10);
X_8:=X_6>=X_7;
X_9:=REF(HHV(CLOSE,45),2);
X_10:=REF(LLV(CLOSE,45),5);
X_11:=(X_9-X_10)/X_10*100<=45;
X_12:=COUNT(EVERY(CLOSE>OPEN,3),45)>=2 AND COUNT(EVERY(CLOSE>OPEN,2),25)>=3 AND COUNT(EVERY(CLOSE>=OPEN,5),65)>=1 AND CLOSE*FINANCE(7)/100000000<=65 AND AMOUNT/10000>=2400 AND AMOUNT/10000<=24000 AND (OPEN-REF(CLOSE,1))/REF(CLOSE,1)*100>=(-6.95) AND (CLOSE-MA(CLOSE,46))/MA(CLOSE,46)*100>=(-4.5) AND (MA(CLOSE,13)-MA(CLOSE,46))/MA(CLOSE,46)*100>=2.85;
X_13:=X_12 AND X_8 AND X_11;
X_14:=EMA(CLOSE,12)-EMA(CLOSE,26);
X_15:=EMA(X_14,29);
X_16:=(X_14-X_15)*2;
X_17:=X_14>=0 AND X_16>=(-0.09) AND X_16<=1.5;
X_18:=X_16>=0;
X_19:=(HIGH-REF(LLV(CLOSE,8),1))/REF(LLV(CLOSE,8),1)*100>32;
X_20:=(HIGH-REF(LLV(CLOSE,25),1))/REF(LLV(CLOSE,25),1)*100>50;
X_21:=(HIGH-REF(LLV(CLOSE,28),1))/REF(LLV(CLOSE,28),1)*100>70;
X_22:=(HIGH-REF(LLV(CLOSE,35),1))/REF(LLV(CLOSE,35),1)*100>90;
X_23:=COUNT(EVERY(X_18,6),35)>=1 AND COUNT(EVERY(X_19,1),15)<1 AND COUNT(EVERY(X_22,1),160)<1 AND COUNT(EVERY(X_20,1),65)<1 AND COUNT(EVERY(X_21,1),150)<1 AND (REF(CLOSE,1)-REF(CLOSE,2))/REF(CLOSE,2)*100<=6.5 AND CLOSE<=EMA(CLOSE,6) AND CLOSE<=MA(CLOSE,20) AND CLOSE*1.195>=REF(HHV(CLOSE,35),2);
X_24:=BARSCOUNT(CLOSE)<220 AND COUNT(EVERY(X_19,1),15)<1 AND (REF(CLOSE,1)-REF(CLOSE,2))/REF(CLOSE,2)*100<=6.5 AND CLOSE<=EMA(CLOSE,6) AND CLOSE<=MA(CLOSE,20) AND CLOSE*1.195>=REF(HHV(CLOSE,35),2);
X_25:=X_23 OR X_24;
X_26:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100>=9.86 AND CLOSE=HIGH;
X_27:=COUNT(EVERY(X_26,1),5)<1 AND COUNT(EVERY(X_26,5),160)<1 AND COUNT(EVERY(X_26,4),145)<1 AND COUNT(EVERY(X_26,3),125)<1 AND COUNT(EVERY(X_26,1),4)<2;
X_28:=BARSCOUNT(CLOSE)<180 AND COUNT(EVERY(X_26,1),5)<1 AND COUNT(EVERY(X_26,4),60)<1 AND COUNT(EVERY(X_26,3),35)<1 AND COUNT(EVERY(X_26,1),4)<2;
X_29:=X_27 OR X_28;
X_30:=(EMA(CLOSE,4)+MA(CLOSE,8)+MA(CLOSE,16))/3;
X_31:=(EMA(CLOSE,6)+MA(CLOSE,12)+MA(CLOSE,24))/3;
X_32:=(EMA(CLOSE,9)+MA(CLOSE,18)+MA(CLOSE,36))/3;
X_33:=(EMA(CLOSE,10)+MA(CLOSE,20)+MA(CLOSE,45))/3;
X_34:=(EMA(CLOSE,18)+MA(CLOSE,36)+MA(CLOSE,72))/3;
X_35:=(EMA(CLOSE,24)+MA(CLOSE,48)+MA(CLOSE,96))/3;
X_36:=CLOSE<=X_31 AND CLOSE<=X_32 AND CLOSE<=X_33 AND CLOSE<=X_34;
X_37:=CLOSE<=X_31 AND CLOSE<=X_32 AND CLOSE<=X_33 AND CLOSE<=X_35;
X_38:=X_36 OR X_37;
X_39:=CLOSE<=MA(CLOSE,13) AND CLOSE<=MA(CLOSE,46);
X_40:=CLOSE<=MA(CLOSE,58) AND CLOSE<=MA(CLOSE,30) AND CLOSE<=MA(CLOSE,10);
X_41:=X_38 AND X_39;
X_42:=X_38 AND X_40;
X_43:=X_41 OR X_42;
X_44:=X_43;
X_45:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=(-3.25);
X_46:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=2.5 AND (CLOSE-REF(CLOSE,2))/REF(CLOSE,2)*100<=(-4.5);
X_47:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=(-0.5) AND X_44;
X_48:=X_45 OR X_46 OR X_47;
X_49:=CLOSE>=OPEN;
X_50:=VOL>=REF(VOL,1)*1.98 AND REF(CLOSE,1)>=REF(OPEN,1) AND CLOSE<OPEN;
X_51:=CLOSE>MA(CLOSE,46);
X_52:=COUNT(EVERY(X_51,1),15)>=8 AND COUNT(EVERY(X_50,1),25)<1 AND VOL<REF(VOL,1)*1.85;
X_53:=MA(CLOSE,5)>=REF(MA(CLOSE,5),1);
X_54:=COUNT(EVERY(X_53,3),65)>=3 AND COUNT(EVERY(X_49,1),4)>=1 AND (REF(HIGH,1)-REF(LLV(LOW,4),1))/REF(LLV(LOW,4),1)*100<20;
RDYX:X_5 AND X_13 AND X_17 AND X_25 AND X_48 AND X_29 AND X_54 AND X_52;
{公式名称: 阳包阴预选
公式描述:
无参数
公式类型: 条件选股公式-其他类型
公式版本: 0
参数精灵:无
用法注释:无
公式源码:}
X_1:=IF(CLOSE>=OPEN OR (CLOSE=OPEN AND CLOSE>=REF(CLOSE,1)),VOL,0);
X_2:=IF(CLOSE<OPEN OR (CLOSE=OPEN AND CLOSE<REF(CLOSE,1)),VOL,0);
X_3:=SUM(X_1,65);
X_4:=SUM(X_2,65);
X_5:=X_3>X_4*1.2 OR COUNT(EVERY(CLOSE>=OPEN,4),65)>=3;
X_6:=LLV(LOW,4);
X_7:=REF(LLV(CLOSE,26),10);
X_8:=X_6>=X_7;
X_9:=REF(HHV(CLOSE,45),2);
X_10:=REF(LLV(CLOSE,45),5);
X_11:=(X_9-X_10)/X_10*100<=45;
X_12:=COUNT(EVERY(CLOSE>OPEN,3),45)>=2 AND COUNT(EVERY(CLOSE>OPEN,2),25)>=3 AND COUNT(EVERY(CLOSE>=OPEN,5),65)>=1 AND CLOSE*FINANCE(7)/100000000<=65 AND AMOUNT/10000>=2400 AND AMOUNT/10000<=24000 AND (OPEN-REF(CLOSE,1))/REF(CLOSE,1)*100>=(-6.95) AND (CLOSE-MA(CLOSE,46))/MA(CLOSE,46)*100>=(-4.5) AND (MA(CLOSE,13)-MA(CLOSE,46))/MA(CLOSE,46)*100>=2.85;
X_13:=X_12 AND X_8 AND X_11;
X_14:=EMA(CLOSE,12)-EMA(CLOSE,26);
X_15:=EMA(X_14,29);
X_16:=(X_14-X_15)*2;
X_17:=X_14>=0 AND X_16>=(-0.09) AND X_16<=1.5;
X_18:=X_16>=0;
X_19:=(HIGH-REF(LLV(CLOSE,8),1))/REF(LLV(CLOSE,8),1)*100>32;
X_20:=(HIGH-REF(LLV(CLOSE,25),1))/REF(LLV(CLOSE,25),1)*100>50;
X_21:=(HIGH-REF(LLV(CLOSE,28),1))/REF(LLV(CLOSE,28),1)*100>70;
X_22:=(HIGH-REF(LLV(CLOSE,35),1))/REF(LLV(CLOSE,35),1)*100>90;
X_23:=COUNT(EVERY(X_18,6),35)>=1 AND COUNT(EVERY(X_19,1),15)<1 AND COUNT(EVERY(X_22,1),160)<1 AND COUNT(EVERY(X_20,1),65)<1 AND COUNT(EVERY(X_21,1),150)<1 AND (REF(CLOSE,1)-REF(CLOSE,2))/REF(CLOSE,2)*100<=6.5 AND CLOSE<=EMA(CLOSE,6) AND CLOSE<=MA(CLOSE,20) AND CLOSE*1.195>=REF(HHV(CLOSE,35),2);
X_24:=BARSCOUNT(CLOSE)<220 AND COUNT(EVERY(X_19,1),15)<1 AND (REF(CLOSE,1)-REF(CLOSE,2))/REF(CLOSE,2)*100<=6.5 AND CLOSE<=EMA(CLOSE,6) AND CLOSE<=MA(CLOSE,20) AND CLOSE*1.195>=REF(HHV(CLOSE,35),2);
X_25:=X_23 OR X_24;
X_26:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100>=9.86 AND CLOSE=HIGH;
X_27:=COUNT(EVERY(X_26,1),5)<1 AND COUNT(EVERY(X_26,5),160)<1 AND COUNT(EVERY(X_26,4),145)<1 AND COUNT(EVERY(X_26,3),125)<1 AND COUNT(EVERY(X_26,1),4)<2;
X_28:=BARSCOUNT(CLOSE)<180 AND COUNT(EVERY(X_26,1),5)<1 AND COUNT(EVERY(X_26,4),60)<1 AND COUNT(EVERY(X_26,3),35)<1 AND COUNT(EVERY(X_26,1),4)<2;
X_29:=X_27 OR X_28;
X_30:=(EMA(CLOSE,4)+MA(CLOSE,8)+MA(CLOSE,16))/3;
X_31:=(EMA(CLOSE,6)+MA(CLOSE,12)+MA(CLOSE,24))/3;
X_32:=(EMA(CLOSE,9)+MA(CLOSE,18)+MA(CLOSE,36))/3;
X_33:=(EMA(CLOSE,10)+MA(CLOSE,20)+MA(CLOSE,45))/3;
X_34:=(EMA(CLOSE,18)+MA(CLOSE,36)+MA(CLOSE,72))/3;
X_35:=(EMA(CLOSE,24)+MA(CLOSE,48)+MA(CLOSE,96))/3;
X_36:=CLOSE<=X_31 AND CLOSE<=X_32 AND CLOSE<=X_33 AND CLOSE<=X_34;
X_37:=CLOSE<=X_31 AND CLOSE<=X_32 AND CLOSE<=X_33 AND CLOSE<=X_35;
X_38:=X_36 OR X_37;
X_39:=CLOSE<=MA(CLOSE,13) AND CLOSE<=MA(CLOSE,46);
X_40:=CLOSE<=MA(CLOSE,58) AND CLOSE<=MA(CLOSE,30) AND CLOSE<=MA(CLOSE,10);
X_41:=X_38 AND X_39;
X_42:=X_38 AND X_40;
X_43:=X_41 OR X_42;
X_44:=X_43;
X_45:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=(-3.25);
X_46:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=2.5 AND (CLOSE-REF(CLOSE,2))/REF(CLOSE,2)*100<=(-4.5);
X_47:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=(-0.5) AND X_44;
X_48:=X_45 OR X_46 OR X_47;
X_49:=CLOSE>=OPEN;
X_50:=VOL>=REF(VOL,1)*1.98 AND REF(CLOSE,1)>=REF(OPEN,1) AND CLOSE<OPEN;
X_51:=CLOSE>MA(CLOSE,46);
X_52:=COUNT(EVERY(X_51,1),15)>=8 AND COUNT(EVERY(X_50,1),25)<1 AND VOL<REF(VOL,1)*1.85;
X_53:=MA(CLOSE,5)>=REF(MA(CLOSE,5),1);
X_54:=COUNT(EVERY(X_53,3),65)>=3 AND COUNT(EVERY(X_49,1),4)>=1 AND (REF(HIGH,1)-REF(LLV(LOW,4),1))/REF(LLV(LOW,4),1)*100<20;
RDYX:X_5 AND X_13 AND X_17 AND X_25 AND X_48 AND X_29 AND X_54 AND X_52;
{公式名称: 阳包阴打板
公式描述:
无参数
公式类型: 技术指标公式-其他类型
画线方法: 副图
公式版本: 0
显示小数: 缺省位数
坐标线位置: 自动
额外Y轴分界: 无
参数精灵:无
用法注释:无
公式源码:}
X_1:=IF(CLOSE>=OPEN OR (CLOSE=OPEN AND CLOSE>=REF(CLOSE,1)),VOL,0);
X_2:=IF(CLOSE<OPEN OR (CLOSE=OPEN AND CLOSE<REF(CLOSE,1)),VOL,0);
X_3:=SUM(X_1,65);
X_4:=SUM(X_2,65);
X_5:=X_3>X_4*1.2 OR COUNT(EVERY(CLOSE>=OPEN,4),65)>=3;
X_6:=LLV(LOW,4);
X_7:=REF(LLV(CLOSE,26),10);
X_8:=X_6>=X_7;
X_9:=REF(HHV(CLOSE,45),2);
X_10:=REF(LLV(CLOSE,45),5);
X_11:=(X_9-X_10)/X_10*100<=45;
X_12:=COUNT(EVERY(CLOSE>OPEN,3),45)>=2 AND COUNT(EVERY(CLOSE>OPEN,2),25)>=3 AND COUNT(EVERY(CLOSE>=OPEN,5),65)>=1 AND CLOSE*FINANCE(7)/100000000<=65 AND AMOUNT/10000>=2400 AND AMOUNT/10000<=24000 AND (OPEN-REF(CLOSE,1))/REF(CLOSE,1)*100>=(-6.95) AND (CLOSE-MA(CLOSE,46))/MA(CLOSE,46)*100>=(-4.5) AND (MA(CLOSE,13)-MA(CLOSE,46))/MA(CLOSE,46)*100>=2.85;
X_13:=X_12 AND X_8 AND X_11;
X_14:=EMA(CLOSE,12)-EMA(CLOSE,26);
X_15:=EMA(X_14,29);
X_16:=(X_14-X_15)*2;
X_17:=X_14>=0 AND X_16>=(-0.09) AND X_16<=1.5;
X_18:=X_16>=0;
X_19:=(HIGH-REF(LLV(CLOSE,8),1))/REF(LLV(CLOSE,8),1)*100>32;
X_20:=(HIGH-REF(LLV(CLOSE,25),1))/REF(LLV(CLOSE,25),1)*100>50;
X_21:=(HIGH-REF(LLV(CLOSE,28),1))/REF(LLV(CLOSE,28),1)*100>70;
X_22:=(HIGH-REF(LLV(CLOSE,35),1))/REF(LLV(CLOSE,35),1)*100>90;
X_23:=COUNT(EVERY(X_18,6),35)>=1 AND COUNT(EVERY(X_19,1),15)<1 AND COUNT(EVERY(X_22,1),160)<1 AND COUNT(EVERY(X_20,1),65)<1 AND COUNT(EVERY(X_21,1),150)<1 AND (REF(CLOSE,1)-REF(CLOSE,2))/REF(CLOSE,2)*100<=6.5 AND CLOSE<=EMA(CLOSE,6) AND CLOSE<=MA(CLOSE,20) AND CLOSE*1.195>=REF(HHV(CLOSE,35),2);
X_24:=BARSCOUNT(CLOSE)<220 AND COUNT(EVERY(X_19,1),15)<1 AND (REF(CLOSE,1)-REF(CLOSE,2))/REF(CLOSE,2)*100<=6.5 AND CLOSE<=EMA(CLOSE,6) AND CLOSE<=MA(CLOSE,20) AND CLOSE*1.195>=REF(HHV(CLOSE,35),2);
X_25:=X_23 OR X_24;
X_26:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100>=9.86 AND CLOSE=HIGH;
X_27:=COUNT(EVERY(X_26,1),5)<1 AND COUNT(EVERY(X_26,5),160)<1 AND COUNT(EVERY(X_26,4),145)<1 AND COUNT(EVERY(X_26,3),125)<1 AND COUNT(EVERY(X_26,1),4)<2;
X_28:=BARSCOUNT(CLOSE)<180 AND COUNT(EVERY(X_26,1),5)<1 AND COUNT(EVERY(X_26,4),60)<1 AND COUNT(EVERY(X_26,3),35)<1 AND COUNT(EVERY(X_26,1),4)<2;
X_29:=X_27 OR X_28;
X_30:=(EMA(CLOSE,4)+MA(CLOSE,8)+MA(CLOSE,16))/3;
X_31:=(EMA(CLOSE,6)+MA(CLOSE,12)+MA(CLOSE,24))/3;
X_32:=(EMA(CLOSE,9)+MA(CLOSE,18)+MA(CLOSE,36))/3;
X_33:=(EMA(CLOSE,10)+MA(CLOSE,20)+MA(CLOSE,45))/3;
X_34:=(EMA(CLOSE,18)+MA(CLOSE,36)+MA(CLOSE,72))/3;
X_35:=(EMA(CLOSE,24)+MA(CLOSE,48)+MA(CLOSE,96))/3;
X_36:=CLOSE<=X_31 AND CLOSE<=X_32 AND CLOSE<=X_33 AND CLOSE<=X_34;
X_37:=CLOSE<=X_31 AND CLOSE<=X_32 AND CLOSE<=X_33 AND CLOSE<=X_35;
X_38:=X_36 OR X_37;
X_39:=CLOSE<=MA(CLOSE,13) AND CLOSE<=MA(CLOSE,46);
X_40:=CLOSE<=MA(CLOSE,58) AND CLOSE<=MA(CLOSE,30) AND CLOSE<=MA(CLOSE,10);
X_41:=X_38 AND X_39;
X_42:=X_38 AND X_40;
X_43:=X_41 OR X_42;
X_44:=X_43;
X_45:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=(-3.25);
X_46:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=2.5 AND (CLOSE-REF(CLOSE,2))/REF(CLOSE,2)*100<=(-4.5);
X_47:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=(-0.5) AND X_44;
X_48:=X_45 OR X_46 OR X_47;
X_49:=CLOSE>=OPEN;
X_50:=VOL>=REF(VOL,1)*1.98 AND REF(CLOSE,1)>=REF(OPEN,1) AND CLOSE<OPEN;
X_51:=CLOSE>MA(CLOSE,46);
X_52:=COUNT(EVERY(X_51,1),15)>=8 AND COUNT(EVERY(X_50,1),25)<1 AND VOL<REF(VOL,1)*1.85;
X_53:=MA(CLOSE,5)>=REF(MA(CLOSE,5),1);
X_54:=COUNT(EVERY(X_53,3),65)>=3 AND COUNT(EVERY(X_49,1),4)>=1 AND (REF(HIGH,1)-REF(LLV(LOW,4),1))/REF(LLV(LOW,4),1)*100<20;
X_55:=X_5 AND X_13 AND X_17 AND X_25 AND X_48 AND X_29 AND X_54 AND X_52;
X_56:=COUNT(EVERY(X_55,1),3)>=1;
X_57:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100>=5.45 AND CLOSE>=OPEN;
X_58:=REF(X_48,1) OR REF(X_48,2) OR (REF(CLOSE,1)-REF(CLOSE,3))/REF(CLOSE,3)*100>=(-4.5) AND (REF(CLOSE,1)-REF(CLOSE,2))/REF(CLOSE,2)*100<=2.5 AND (REF(CLOSE,1)-REF(MA(CLOSE,46),1))/REF(MA(CLOSE,46),1)*100>=(-4.5);
RYBY:X_56 AND X_57 AND X_58;
{公式名称: 阳包阴打板
公式描述:
无参数
公式类型: 条件选股公式-其他类型
公式版本: 0
参数精灵:无
用法注释:无
公式源码:}
X_1:=IF(CLOSE>=OPEN OR (CLOSE=OPEN AND CLOSE>=REF(CLOSE,1)),VOL,0);
X_2:=IF(CLOSE<OPEN OR (CLOSE=OPEN AND CLOSE<REF(CLOSE,1)),VOL,0);
X_3:=SUM(X_1,65);
X_4:=SUM(X_2,65);
X_5:=X_3>X_4*1.2 OR COUNT(EVERY(CLOSE>=OPEN,4),65)>=3;
X_6:=LLV(LOW,4);
X_7:=REF(LLV(CLOSE,26),10);
X_8:=X_6>=X_7;
X_9:=REF(HHV(CLOSE,45),2);
X_10:=REF(LLV(CLOSE,45),5);
X_11:=(X_9-X_10)/X_10*100<=45;
X_12:=COUNT(EVERY(CLOSE>OPEN,3),45)>=2 AND COUNT(EVERY(CLOSE>OPEN,2),25)>=3 AND COUNT(EVERY(CLOSE>=OPEN,5),65)>=1 AND CLOSE*FINANCE(7)/100000000<=65 AND AMOUNT/10000>=2400 AND AMOUNT/10000<=24000 AND (OPEN-REF(CLOSE,1))/REF(CLOSE,1)*100>=(-6.95) AND (CLOSE-MA(CLOSE,46))/MA(CLOSE,46)*100>=(-4.5) AND (MA(CLOSE,13)-MA(CLOSE,46))/MA(CLOSE,46)*100>=2.85;
X_13:=X_12 AND X_8 AND X_11;
X_14:=EMA(CLOSE,12)-EMA(CLOSE,26);
X_15:=EMA(X_14,29);
X_16:=(X_14-X_15)*2;
X_17:=X_14>=0 AND X_16>=(-0.09) AND X_16<=1.5;
X_18:=X_16>=0;
X_19:=(HIGH-REF(LLV(CLOSE,8),1))/REF(LLV(CLOSE,8),1)*100>32;
X_20:=(HIGH-REF(LLV(CLOSE,25),1))/REF(LLV(CLOSE,25),1)*100>50;
X_21:=(HIGH-REF(LLV(CLOSE,28),1))/REF(LLV(CLOSE,28),1)*100>70;
X_22:=(HIGH-REF(LLV(CLOSE,35),1))/REF(LLV(CLOSE,35),1)*100>90;
X_23:=COUNT(EVERY(X_18,6),35)>=1 AND COUNT(EVERY(X_19,1),15)<1 AND COUNT(EVERY(X_22,1),160)<1 AND COUNT(EVERY(X_20,1),65)<1 AND COUNT(EVERY(X_21,1),150)<1 AND (REF(CLOSE,1)-REF(CLOSE,2))/REF(CLOSE,2)*100<=6.5 AND CLOSE<=EMA(CLOSE,6) AND CLOSE<=MA(CLOSE,20) AND CLOSE*1.195>=REF(HHV(CLOSE,35),2);
X_24:=BARSCOUNT(CLOSE)<220 AND COUNT(EVERY(X_19,1),15)<1 AND (REF(CLOSE,1)-REF(CLOSE,2))/REF(CLOSE,2)*100<=6.5 AND CLOSE<=EMA(CLOSE,6) AND CLOSE<=MA(CLOSE,20) AND CLOSE*1.195>=REF(HHV(CLOSE,35),2);
X_25:=X_23 OR X_24;
X_26:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100>=9.86 AND CLOSE=HIGH;
X_27:=COUNT(EVERY(X_26,1),5)<1 AND COUNT(EVERY(X_26,5),160)<1 AND COUNT(EVERY(X_26,4),145)<1 AND COUNT(EVERY(X_26,3),125)<1 AND COUNT(EVERY(X_26,1),4)<2;
X_28:=BARSCOUNT(CLOSE)<180 AND COUNT(EVERY(X_26,1),5)<1 AND COUNT(EVERY(X_26,4),60)<1 AND COUNT(EVERY(X_26,3),35)<1 AND COUNT(EVERY(X_26,1),4)<2;
X_29:=X_27 OR X_28;
X_30:=(EMA(CLOSE,4)+MA(CLOSE,8)+MA(CLOSE,16))/3;
X_31:=(EMA(CLOSE,6)+MA(CLOSE,12)+MA(CLOSE,24))/3;
X_32:=(EMA(CLOSE,9)+MA(CLOSE,18)+MA(CLOSE,36))/3;
X_33:=(EMA(CLOSE,10)+MA(CLOSE,20)+MA(CLOSE,45))/3;
X_34:=(EMA(CLOSE,18)+MA(CLOSE,36)+MA(CLOSE,72))/3;
X_35:=(EMA(CLOSE,24)+MA(CLOSE,48)+MA(CLOSE,96))/3;
X_36:=CLOSE<=X_31 AND CLOSE<=X_32 AND CLOSE<=X_33 AND CLOSE<=X_34;
X_37:=CLOSE<=X_31 AND CLOSE<=X_32 AND CLOSE<=X_33 AND CLOSE<=X_35;
X_38:=X_36 OR X_37;
X_39:=CLOSE<=MA(CLOSE,13) AND CLOSE<=MA(CLOSE,46);
X_40:=CLOSE<=MA(CLOSE,58) AND CLOSE<=MA(CLOSE,30) AND CLOSE<=MA(CLOSE,10);
X_41:=X_38 AND X_39;
X_42:=X_38 AND X_40;
X_43:=X_41 OR X_42;
X_44:=X_43;
X_45:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=(-3.25);
X_46:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=2.5 AND (CLOSE-REF(CLOSE,2))/REF(CLOSE,2)*100<=(-4.5);
X_47:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100<=(-0.5) AND X_44;
X_48:=X_45 OR X_46 OR X_47;
X_49:=CLOSE>=OPEN;
X_50:=VOL>=REF(VOL,1)*1.98 AND REF(CLOSE,1)>=REF(OPEN,1) AND CLOSE<OPEN;
X_51:=CLOSE>MA(CLOSE,46);
X_52:=COUNT(EVERY(X_51,1),15)>=8 AND COUNT(EVERY(X_50,1),25)<1 AND VOL<REF(VOL,1)*1.85;
X_53:=MA(CLOSE,5)>=REF(MA(CLOSE,5),1);
X_54:=COUNT(EVERY(X_53,3),65)>=3 AND COUNT(EVERY(X_49,1),4)>=1 AND (REF(HIGH,1)-REF(LLV(LOW,4),1))/REF(LLV(LOW,4),1)*100<20;
X_55:=X_5 AND X_13 AND X_17 AND X_25 AND X_48 AND X_29 AND X_54 AND X_52;
X_56:=COUNT(EVERY(X_55,1),3)>=1;
X_57:=(CLOSE-REF(CLOSE,1))/REF(CLOSE,1)*100>=6.45 AND CLOSE>=OPEN;
X_58:=REF(X_48,1) OR REF(X_48,2) OR (REF(CLOSE,1)-REF(CLOSE,3))/REF(CLOSE,3)*100>=(-4.5) AND (REF(CLOSE,1)-REF(CLOSE,2))/REF(CLOSE,2)*100<=2.5 AND (REF(CLOSE,1)-REF(MA(CLOSE,46),1))/REF(MA(CLOSE,46),1)*100>=(-4.5);
RYBY:X_56 AND X_57 AND X_58;
联系客服
