废布头做成装饰花束-超简单

转至外国网站：具体步骤如下
1，用做假花用的细铁丝做树枝，用胶带缠绕处理下；
2，剪两片叶子形状的布片，用双面衬平整的粘到一起；
3，用Z型针迹在叶子边缘缝一圈，边缘要留空隙以便剪牙口；
4，把树枝用Z型针迹固定到叶子中心，用剪刀在边缘剪出自己喜欢的形状，一片叶子搞定；
5，取一个叶子做主枝干，其余的叶子左右按不同的距离固定在主枝干上；
6，按自己的喜欢弯折铁丝，给树枝造型，叶子上的铁丝可以弯出一定弧度，更逼真；
7，选个花瓶，把做好的树枝都插到里头，当当~~~大功告成！

以上是我理解的，以下是原话，是不是很简单？
Step 1: use floral tape to wrap lengths of 18 gauge floral wire

Step 2: use wire cutters to cut wire into 3” pieces.

Step 3: create a leaf pattern in desired size. The leaf pattern we used was 3 1/2 inches long.

Step 4: to create the double-sided leaves, fold your fabric in half (wrong sides together) and cut fabric into leaf shapes using your leaf pattern. For the arrangement shown, we used 84 double-sided fabric leaves.

Step 5: cut interfacing into triangles small enough to fit between the two sides of each leaf. Use an iron to fuse the two sides of each leaf together.

Step 6: using the zigzag stitch setting on your sewing machine, sew around the edges of each leaf leaving about 1/4″ of fabric around the edges.

Step 7: use pinking shears to cut around the edge of each leaf.

Step 8: using a wide zigzag stitch, sew each leaf onto the 3” pieces of wrapped floral wire

Step 9: use the floral tape to wrap seven of the stemmed leaves onto a long piece of 16 gauge wire. Start at the top of the wire and work your way down keeping the stemmed leaves flat against the long wire. Repeat this process until you have the desired number of branches constructed.

Step 10: gently bend each leaf away from the main stem into the desired position.

Step 11: Arrange the branches in your favorite vase to create a beautiful fabric arrangement

图片:step-5.jpg

图片:step-3.jpg

图片:step-1.jpg

图片:quilt-after-pic.jpg

本站仅提供存储服务，所有内容均由用户发布，如发现有害或侵权内容，请点击举报。