GEOVISION iPhone安装程序

 

© XTECHCAM 2006 - 2011

Web Design, Domain and Hosting by XTECH SOLUTIONS INC

GEOVISION iPhone安装程序

To allow remote access to your Geovision system from an iPhone enable these setting on your Geovision system first.要允许远程访问这些设置使您的GEOVISION系统从iPhone到您的GEOVISION系统。

1. Click the Network button and select WebCam Server.点击网络按钮，并选择网络摄像头服务器。
2. Click the JPG tab, and select Create JPEG/GIF file(s).单击“JPG”选项卡，并选择创建JPEG / GIF文件（S）。
3. Click the Mobile tab and activate the settings of communication ports.点击移动“选项卡，并激活通信端口的设置。
4. Click OK to start the WebCam server.单击“确定”启动摄像头服务器。
5. Please note that you need to setup port forwarding on your router for the following ports: 80, 8866, and 5511请注意，您需要您的路由器上设置端口转发以下端口：80，8866和5511
6. Download the GV-iView application from itunes and install it on your iPhone.从iTunes下载的GV - iView中的应用，它安装在您的iPhone。 You can download by clicking on this link: download GV-iView app .您可以点击此链接： 下载GV - iView中的应用程序下载。
   
7. Click on the GV-iView application on your iPhone to launch.您的iPhone推出的GV - iView中的应用。
8. On the login screen, enter the IP address of your Geovision system (or the IP address of your Internet connection at the location of your Geovision DVR if you are using port forwarding).在登录屏幕上，输入您的GEOVISION系统（或在您的奇偶的DVR位置您的Internet连接的IP地址，如果你是使用端口转发）的IP地址。 Also enter the userid and password for your Geovision system.也可以输入您的GEOVISION系统的用户名和密码。
   
   
   
   
   
   
9. Click Done.单击“完成”。
10. Once you are connected, the 6 camera view screen will appear as seen below.一旦连接，6相机视图屏幕上会出现如下图所示。
    
    
    
    
    
    
11. From the 6 camera view screen, click on any of the cameras to navigate to a single camera view for that camera.从6摄像机视图画面中，点击任何相机上浏览到一个单台摄像机，相机视图。 To the right of the camera, there is a menu system.相机的右侧，有一个菜单系统。
    
    
    
    
    
    The functions of these buttons is described below.这些按钮的功能如下所述。
    
    
    

 

 

Geovision iPhone Setup

To allow remote access to your Geovision system from an iPhone enable these setting on your Geovision system first.

1. Click the Network button and select WebCam Server.
2. Click the JPG tab, and select Create JPEG/GIF file(s).
3. Click the Mobile tab and activate the settings of communication ports.
4. Click OK to start the WebCam server.
5. Please note that you need to setup port forwarding on your router for the following ports: 80, 8866, and 5511
6. Download the GV-iView application from itunes and install it on your iPhone.  You can download by clicking on this link: download GV-iView app .
   
7. Click on the GV-iView application on your iPhone to launch.
8. On the login screen, enter the IP address of your Geovision system (or the IP address of your Internet connection at the location of your Geovision DVR if you are using port forwarding).  Also enter the userid and password for your Geovision system.
   
   
   
   
   
   
9. Click Done.
10. Once you are connected, the 6 camera view screen will appear as seen below.
    
    
    
    
    
    
11. From the 6 camera view screen, click on any of the cameras to navigate to a single camera view for that camera. To the right of the camera, there is a menu system. 
    
    
    
    
    
    The functions of these buttons is described below.