实现要点：
(1) 动静分离discuzx，动静都要基于负载均衡实现； 拓扑结构 两台keepalived的双主模型对两台haproxy主机做高可用，两个VIP分别为10.1.253.11与10.1.253.12 haproxy主机负责接收请求、动静分离请求的图片资源、调度单台varnish缓存主机及两台httpd主机 varnish缓存主机负责缓存后端nginx服务器响应的用户上传的静态图片资源，并调度两台nginx主机 nginx主机负责响应图片资源，并为websrv主机提供nfs服务，映射为discuzx程序attachment目录 websrv安装httpd、mysql、php程序，处理discuzx程序的动态资源及未分离的静态资源，如css等 nginx服务器配置nfs服务 安装nfs服务 1.yum install nfs-utils 配置nfs共享 /etc/exports 1./data/discuz 10.1.253.66(rw,no_root_squash) 10.1.253.67(rw,no_root_squash) 创建apache用户，并授权 1.useradd -s -u 48 -g 48 apache 启动nfs服务 1.systemctl start nfs.service websrvs主机配置 安装amp程序和discuzx 关键步骤： 1.yum install httpd mysql php php-mysql php-xcache 挂载nfs到用户上传附件路径 启动mysql、httpd并访问测试 nginx主机配置 nginx负责响应用户上传的静态图片资源，nginx的虚拟主机root路径指向nfs共享的目录即可。 为了能够将URL的资源路径映射为虚拟主机的root路径下所对应的资源，应使用nginx对请求的URL重写或重定向，显然可在最前端的haproxy主机或varnish服务或nginx服务都能够实现URL的重写，只要确保新的URL能够映射到nginx主机下该资源的路径即可。没有必要同时在haproxy、varnish、nginx都重写同一URL，考虑到后端主机的数量，我觉得可以在haproxy或varnish中重写URL。 安装nginx 配置虚拟主机 1.server { 启动nginx服务并访问测试 某资源的URL源路径 替换该URL的host为nginx主机，直接访问该URL nginx服务器输出日志 1.10.1.250.19 - - [13/Nov/2016:9:01:53 +0800] 'GET /data/attachment/forum/201611/12/174905kkys2e2wgmv25ywe.jpg HTTP/1.1' 200 126931 '-' 'Mozilla/5.0 (Windows NT 6.1; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/52.0.2743.82 Safari/537.36' '-' varnish缓存服务器 varnish服务器负责缓存响应资源，并调度nginx服务器，以及检测nginx服务的健康状态等 安装varnish 安装前需配置好epel的yum源 1.yum install varnish 配置缓存服务 配置varnish运行时参数 /etc/varnish/varnish.params 1.VARNISH_LISTEN_PORT=80 配置varnish缓存服务 前面说过，对URL的重写可在varnish服务器中实现，对于有众多后端nginx主机的情况，在varnish重写URL更加方便； 在varnish中重写URL使用regsub函数实现； /etc/varnish/default.vcl 1.vcl 4.0; 启动varnish并访问测试 1.systemctl start varnish —访问varnish服务器下该资源的URL —nginx服务器端的访问日志 1.10.1.253.29 - - [13/Nov/2016:22:21:43 +0800] 'GET /forum/201611/12/174905kkys2e2wgmv25ywe.jpg HTTP/1.1' 304 0 '-' 'Mozilla/5.0 (Windows NT 6.1; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/52.0.2743.82 Safari/537.36' '10.1.250.19' 效果就是：只要重写的路径下存在该资源，无论URL中该资源的前的路径是什么，都统统能够重写为自定义路径下的相同资源 haproxy主机配置 安装 1.yum install haproxy 配置文件 配置文件路径：/etc/haproxy/haproxy.cfg 配置frontend前端 1.frontend main *:80 配置backend后端 1.backend dynamic 配置stats页面 1.listen stats 测试结果 keepalived高可用haproxy服务 安装 1.yum install keepalived 配置双主模型的keepalived主机 /etc/keepalived/keepalived.conf 1.global_defs { 启动keepalived服务并测试 1.systemctl start keepalived haproxy1与haproxy2同时上线时 —haproxy1拥有VIP1 10.1.253.11 —haproxy2拥有VIP2 10.1.253.12 触发haproxy1下线操作 VI_1(即haproxy1)上在/etc/keepalived/目录下建立down文件，让keepalived的track_script功能检测到此文件并实现下线功能。 —haproxy1上关于keepalived的日志输出： 1.Nov 14 13:18:55 h1 Keepalived_vrrp[54901]: VRRP_Script(chk_down) failed haproxy2主机无法收到haproxy1多播发送的HEARTBEAT信息，将成为VI_1的MASTER主机。 —haproxy2上关于keepalived的日志输出： 1.Nov 14 13:19:01 h1 Keepalived_vrrp[58092]: VRRP_Instance(VI_1) forcing a new MASTER election —haproxy2上将同时拥有 VIP1 与VIP2 触发haproxy1重新上线操作 把VI_1(即haproxy1)中/etc/keepalived/目录下down文件移除，让keepalived的track_script功能检测不到此文件实现重新上线的功能。 —haproxy1上关于keepalived的日志输出： 1.Nov 14 13:58:02 h1 Keepalived_vrrp[67748]: VRRP_Script(chk_down) succeeded —haproxy2上关于keepalived的日志输出： 1.Nov 14 13:58:12 h1 Keepalived_vrrp[58092]: VRRP_Instance(VI_1) Received higher prio advert —再次恢复为haproxy1拥有VIP1，haproxy2拥有VIP2 测试结果 —同时访问 VIP1 或 VIP2 都能正常访问由haproxy代理的discuzx网站 —对于用户上传的附件资源，由varnish服务器或nginx服务器进行响应 总结 HAProxy是一款纯粹的高性能反向代理服务器，能够代理应用层协议，也可以定义mode tcp让代理传输层协议。HAProxy能够代理HTTP协议和TCP协议，支持代理Web Server、Dynamic Engine、DateBase，且能够检测后端主机的健康状态，实现后端主机的HA。其内建的stats管理页能够非常方便查看前端、后端主机的状态，简单的操作就能实现后端主机的上下线。 关于URL的重写，上文中已经说明可在HAProxy代理服务器、Varnish缓存服务器或Nginx主机上实现，但为了便于管理较多的后端主机，通常选择在HAProxy服务器或者Varnish缓存服务器上实现URL的重写。 HAProxy代理服务器的单进程事件驱动模型使得其能够处理大并发请求，使用弹性二叉树算法存储的连接会话能够非常灵活的进行管理，对于后端主机调度算法也能做到非常精细。 不关注 就捣蛋
(2) 进一步测试在haproxy和后端主机之间添加varnish缓存；
(3) 给出拓扑设计；
(4) haproxy的设定要求：
(a) 启动stats；
(b) 自定义403、502和503的错误页；
(c) 各组后端主机选择合适的调度方法；
(d) 记录好日志；
(e) 使用keepalived高可用haproxy；
2.setfacl -m u:apache:rwx /data/discuz
2.mysql -uroot -p -e 'CREATE DATABASE ultrax;GRANT ALL ON ultrax.* TO ultraxuser@10.1.%.% IDENTIFIED BY 'ultraxpass';FLUSH PRIVILEGES'
2. listen 82;
3. server_name localhost;
4. location / {
5. root /data/discuz;
6. index index.html index.htm;
7. }
8. location ~* \.(jpg|jpeg|gif|png)$ {
9. root /data/discuz;
10. rewrite ^/.*forum/(.*)$ /$1 break;
11. }
12.}
2.……
3.VARNISH_STORAGE='malloc,128M'
为了避免与nginx服务器端的URL重写混淆，应把nginx虚拟主机配置中的URL重写注释；
2.import directors;
……
13.backend nginx1 {
14. .host = '10.1.253.29';
15. .port = '81';
16. .probe = ok;
17.}
18.backend nginx2 {
19. .host = '10.1.253.29';
20. .port = '82';
22.}
23.sub vcl_init {
24. new RR = directors.round_robin();
25. RR.add_backend(nginx1);
26. RR.add_backend(nginx2);
27.}
28.
29.sub vcl_recv {
30. set req.backend_hint = RR.backend();
31. if (req.url ~ '(?i)\.(jpg|jpeg|gif|png)$') {
32. set req.url = regsub(req.url, '/.*attachment/(.*)', '/\1');
33. }
43.}
44.
48.sub vcl_backend_response {
49. # Happens after we have read the response headers from the backend.
50. #
51. # Here you clean the response headers, removing silly Set-Cookie headers
52. # and other mistakes your backend does.
53.}
54.
55.sub vcl_deliver {
61.}
主要是定义前端和后端的配置，其中前端基于acl对URI进行匹配控制：
url_static_geg条件为URI的起始路径，url_static_end条件为URI的后缀名
只有同时满足以上两个条件才调用static主机组，其余的URL使用默认的dynamic主机组
此外，还定义了错误响应码的重定向到另一主机的
以及开启了haproxy的stats页面
2. acl url_static_beg path_beg -i /data/attachment
3. acl url_static_end path_end -i .jpg .gif .png .css .js
4.
5. use_backend static if url_static_beg url_static_end
6.
7. default_backend dynamic
8.
9. errorloc 503 http://10.1.253.29:82/errorpage/503sorry.html
10. errorloc 403 http://10.1.253.29:82/errorpage/403sorry.html
11. errorloc 502 http://10.1.253.29:82/errorpage/502sorry.html
2. balance roundrobin
4. server web1 10.1.253.66:81 check cookie amp1
5. server web2 10.1.253.66:82 check cookie amp2
6.
7.backend static
8. balance roundrobin
9. server ngx1 10.1.253.29:81 check
10. server ngx2 10.1.253.29:82 check
2. bind :
3. stats enable
4. stats uri /admin?stats
……
7. stats refresh 10s
8. stats admin if TRUE
9. stats hide-version
2. notification_email {
3. root@localhost
4. }
5. notification_email_from keepalived@jasonmc.com
6. smtp_server localhost
7. smtp_connect_timeout 30
8. router_id node1
9. vrrp_mcast_group4 224.22.29.1
10.}
11.vrrp_script chk_down {
12. script '[[ -f /etc/keepalived/down ]]&& exit 1 || exit 0'
13. interval 1
14. weight -5
15.}
16.vrrp_script chk_haproxy {
17. script 'killall -0 haproxy && exit 0 || exit 1'
18. interval 1
19. weight -5
20.}
21.vrrp_instance VI_1 {
22. state MASTER
23. interface eno16777736
24. virtual_router_id 10
25. priority 96
26. advert_int 10
27. authentication {
28. auth_type PASS
29. auth_pass 1a7b2ce6
30. }
31. virtual_ipaddress {
32. 10.1.253.11 dev eno16777736
33. }
34. track_script {
35. chk_down
36. chk_haproxy
37. }
38.}
39.vrrp_instance VI_2 {
40. state BACKUP
41. interface eno16777736
42. virtual_router_id 11
43. priority 100
44. advert_int 11
45. authentication {
46. ……
48. }
2.Nov 14 13:19:01 h1 Keepalived_vrrp[54901]: VRRP_Instance(VI_1) Received higher prio advert
3.Nov 14 13:19:01 h1 Keepalived_vrrp[54901]: VRRP_Instance(VI_1) Entering BACKUP STATE
4.Nov 14 13:19:01 h1 Keepalived_vrrp[54901]: VRRP_Instance(VI_1) removing protocol VIPs.
5.Nov 14 13:19:01 h1 Keepalived_healthcheckers[54900]: Netlink reflector reports IP10.1.253.11 removed
2.Nov 14 13:19:01 h1 Keepalived_vrrp[58092]: VRRP_Instance(VI_1) forcing a new MASTER election
3.Nov 14 13:19:11 h1 Keepalived_vrrp[58092]: VRRP_Instance(VI_1) Transition to MASTER STATE
4.Nov 14 13:19:21 h1 Keepalived_vrrp[58092]: VRRP_Instance(VI_1) Entering MASTER STATE
5.Nov 14 13:19:21 h1 Keepalived_vrrp[58092]: VRRP_Instance(VI_1) setting protocol VIPs.
6.Nov 14 13:19:21 h1 Keepalived_vrrp[58092]: VRRP_Instance(VI_1) Sending gratuitousARPs on eno16777736 for 10.1.253.11
7.Nov 14 13:19:21 h1 Keepalived_healthcheckers[58091]: Netlink reflector reports IP10.1.253.11 added
8.Nov 14 13:19:26 h1 Keepalived_vrrp[58092]: VRRP_Instance(VI_1) Sending gratuitousARPs on eno16777736 for 10.1.253.11
2.Nov 14 13:58:12 h1 Keepalived_vrrp[67748]: VRRP_Instance(VI_1) Transition to MASTER STATE
3.Nov 14 13:58:22 h1 Keepalived_vrrp[67748]: VRRP_Instance(VI_1) Entering MASTER STATE
4.Nov 14 13:58:22 h1 Keepalived_vrrp[67748]: VRRP_Instance(VI_1) setting protocol VIPs.
5.Nov 14 13:58:22 h1 Keepalived_vrrp[67748]: VRRP_Instance(VI_1) Sending gratuitousARPs on eno16777736 for 10.1.253.11
6.Nov 14 13:58:22 h1 Keepalived_healthcheckers[67747]: Netlink reflector reports IP10.1.253.11 added
7.Nov 14 13:58:27 h1 Keepalived_vrrp[67748]: VRRP_Instance(VI_1) Sending gratuitousARPs on eno16777736 for 10.1.253.11
2.Nov 14 13:58:12 h1 Keepalived_vrrp[58092]: VRRP_Instance(VI_1) Entering BACKUP STATE
3.Nov 14 13:58:12 h1 Keepalived_vrrp[58092]: VRRP_Instance(VI_1) removing protocol VIPs.
4.Nov 14 13:58:12 h1 Keepalived_healthcheckers[58091]: Netlink reflector reports IP10.1.253.11 removed
联系客服
