SQL common keywords examples and tricks

Case Sensitive Check

1. Return names contain upper case 

Select id, name from A where name<>lower(name) collate SQL_Latin1_General_CP1_CS_AS

2. Return same name but diff case 

Select id, A.name, B.name from A inner join B on A.name=B.name where A.name<>B.name collate SQL_Latin1_General_CP1_CS_AS 

 

 

Case when

https://blog.csdn.net/evilcry2012/article/details/52148641

****return result need to be same, i.e. either all varchar or all int or all decimal

1. Calculate sum of different group

国家（country）    人口（population）
中国    600
美国    100
加拿大    100
英国    200
法国    300
日本    250
德国    200
墨西哥    50
印度    250

Result:

洲    人口
亚洲    1100
北美洲    250
其他    700

SELECT  SUM(population),        CASE country                WHEN '中国'     THEN '亚洲'                WHEN '印度'     THEN '亚洲'                WHEN '日本'     THEN '亚洲'                WHEN '美国'     THEN '北美洲'                WHEN '加拿大'  THEN '北美洲'                WHEN '墨西哥'  THEN '北美洲'        ELSE '其他' ENDFROM    Table_AGROUP BY CASE country                WHEN '中国'     THEN '亚洲'                WHEN '印度'     THEN '亚洲'                WHEN '日本'     THEN '亚洲'                WHEN '美国'     THEN '北美洲'                WHEN '加拿大'  THEN '北美洲'                WHEN '墨西哥'  THEN '北美洲'        ELSE '其他' END;

2. Calculate total amount of different pay level

SELECT        CASE WHEN salary <= 500 THEN '1'             WHEN salary > 500 AND salary <= 600  THEN '2'             WHEN salary > 600 AND salary <= 800  THEN '3'             WHEN salary > 800 AND salary <= 1000 THEN '4'        ELSE NULL END salary_class,        COUNT(*)FROM    Table_AGROUP BY        CASE WHEN salary <= 500 THEN '1'             WHEN salary > 500 AND salary <= 600  THEN '2'             WHEN salary > 600 AND salary <= 800  THEN '3'             WHEN salary > 800 AND salary <= 1000 THEN '4'        ELSE NULL END;

3. Calculate sum of different group with multiple columns

国家（country）    性别（sex）    人口（population）
中国    1    340
中国    2    260
美国    1    45
美国    2    55
加拿大    1    51
加拿大    2    49
英国    1    40
英国    2    60

Result: 
国家    男    女
中国    340    260
美国    45    55
加拿大    51    49
英国    40    60

SELECT country,       SUM( CASE WHEN sex = '1' THEN                       population ELSE 0 END),  --male population       SUM( CASE WHEN sex = '2' THEN                       population ELSE 0 END)   --female populationFROM  Table_AGROUP BY country;

 

 

Cast & Convert (change data type)

1. Cast is compatible to both sql server and mysql, convert is designed for sql server, and it can have more styles and specially useful for datetime (check datetime part)

select cast(1.73 as int) --return 1select cast(1.73 as decimal(4,0)) --return 2--keep 2 decimal, this will round to nearest 2 decimalselect cast(1,234 as decimal(10,2)) --return 1.23select cast(1,236 as decimal(10,2)) --return 1.24

****cast to varchar, if the string is long than 20, use varchar(100) or varchar(max)

 2. Automatic type change when using declare

declare @zz1 decimal(5,4)=2.0  if @zz1=2  select @zz1 --output: 2.0000 so decimal can compare to intdeclare @zz1 decimal(5,4)=2   if @zz1=2.0  select @zz1--output: 2.0000 so declare will correct the data type from int to decimaldeclare @zz2 int=1.0 if @zz2=1.0  select @zz2--output: 1 so declare will correct the data type from decimal to int--and int can compare to decimaldeclare @zz3 varchar(100)='2.0' if @zz3=2.0  select @zz3--output: 2.0, correct way to declare a decimal varchardeclare @zz3 varchar(100)='2.0' if @zz3=2  select @zz3--output: Conversion failed when converting the varchar value '2.0' to data type int.--so if you declare a decimal varchar, it can not be compared with intdeclare @zz3 varchar=2.0 --wrong declare, this will cause an error:--output: Arithmetic overflow error converting numeric to data type varchardeclare @zz4 varchar=4 if @zz4=4.0  select @zz4--output: 4, if assign a int to varchar, can declare without quote, this equal to declare with int keyworddeclare @zz5 varchar(100)='4' if @zz5=4.0   select @zz5--output: 4, this is equal to last one, declare with quote for integer

 

 

Constraints (6 basic)

1. SQL NOT NULL

CREATE TABLE ConstraintDemo1(   ID INT NOT NULL,   Name VARCHAR(50) NULL)

In SSMS, leave it unselected

2. UNIQUE

a. Unique can be null, and unique check will not check null values (means you can have multiple nulls)

b. You can have multiple unique constrains for one table but only one primary key

c. Example: phone number, which is unique, but some pp may not leave phone number

CREATE TABLE ConstraintDemo2(   ID INT UNIQUE,   Name VARCHAR(50) NULL)

In SSMS, right click->indexes/keys

3. PRIMARY KEY (Unique + Not NULL + indexable)

CREATE TABLE ConstraintDemo3(   ID INT PRIMARY KEY,   Name VARCHAR(50) NULL)

In SSMS, right click -> set primary key

4. FOREIGN KEY

https://www.liaoxuefeng.com/wiki/1177760294764384/1218728424164736

ALTER TABLE courses --main tableADD CONSTRAINT fk_courses_teachers --foreign key name = fk_mainTable_referenceTableFOREIGN KEY (class_id) --col in main table (foreign key)REFERENCES classes (id); -- table(col) of source table for reference, primary key

In SSMS, right click -> relationships -> add

Primary key table is the reference, foreign key table is the main table

a. A foreign key connect main table col and reference table col, to not allow insert rows has invalid col value to main table as per reference table col 

b. You can only have col value for main table which exist in reference, but you may have col value in reference which not exists in main table

c. Foreign Key will decrease db performance, in reality companies rely on the logic in code instead of foreign key

d. Why not merge 2 tables? Because divide table into independant ones can separate the popular ones and less popular ones and increase speed by not reading less popular ones all the time

5. CHECK (conditions on value of col when insert)

CREATE TABLE Persons (    ID int NOT NULL,    Age int CHECK (Age>=18));
CREATE TABLE Persons (    ID int NOT NULL,    Age int,    City varchar(255),    CONSTRAINT CONS_Name CHECK (Age>=18 AND City='Sandnes'));

In SSMS, right click -> check constrains -> add -> edit expression

6. DEFAULT (default value of a col on insert if not given)

CREATE TABLE Orders (    ID int NOT NULL,    OrderNumber int NOT NULL,    OrderDate date DEFAULT GETDATE() );

In SSMS, in column properties ->use (value), value can be string, number or function()

 

 

Create a column of numbers (usually ids)

DECLARE @startnum INT=1000 --startDECLARE @endnum INT=1020 --end ;WITH gen AS (    SELECT @startnum AS num    UNION ALL    --change number+ i to adjust gap i    SELECT num+3 FROM gen WHERE num+1<=@endnum )SELECT * FROM genoption (maxrecursion 10000)

num
1000
1003
1006
1009
1012
1015
1018
1021

 

Create a column of strings from one long string

;WITH Split(stpos,endpos)        AS(            SELECT 0 AS stpos, CHARINDEX(',','Alice,Jack,Tom') AS endpos             UNION ALL            SELECT endpos+1, CHARINDEX(',','Alice,Jack,Tom',endpos+1) FROM Split WHERE endpos > 0        )          --LTRIM RTRIM to get rid of white space before start or after end of str        SELECT RTRIM(LTRIM(SUBSTRING('Alice,Jack,Tom',stpos,COALESCE(NULLIF(endpos,0),LEN('Alice,Jack,Tom')+1)-stpos))) as name into #temp        FROM Split

name
Alice
Jack
Tom

 

 

Create a single table has columns of strings

SELECT * into #temp FROM (VALUES (1,'Alice'),(2,'Jack'),(3,'Tom')) AS t(id,name)

 id name
1Alice
2Jack
3Tom

 

 

Create a temp table (copy a table)

 1. From a existing table, no need create table (not copy indexing or primary key)

Select id, name, 'placeholder' as sex into #temp from A

Trick to copy a table structure(cols and datatype) but not content

--0=1 to not copy any rowsSelect id, name into #temp from A where 0=1 --the above query equals to select id, name into #temp from #temp1delete from #temp1

2. Create temp table (lifespan: current session, drop on close tab)

create table #tmpStudent(Id int IDENTITY(1,1) PRIMARY KEY,Name varchar(50),Age int) insert into #tmpStudent select id,name,age from #tmpStudent

3. Global temp table (##temp, can visit from other tab, drop on close tab where it is created)

4. Using table variable (lifespan: current transaction, drop after running query block)

DECLARE @temp Table ( Id int, Name varchar(20), Age int )

 

 

Cursor (only use if you need action diff on each row)

1. A general nested loop to go forward one by one

DECLARE  @Class int, @Score int; DECLARE cursor_product CURSOR LOCAL FAST_FORWARD READ_ONLY --fastest configFOR SELECT class, score FROM #Student; OPEN cursor_product; FETCH NEXT FROM cursor_product INTO @Class,@Score; --must have! WHILE @@FETCH_STATUS = 0BEGIN    PRINT 'Class: '+ CAST(@Class AS varchar)+' Score: '+ CAST(@Score AS varchar);    FETCH NEXT FROM cursor_product INTO @Class, @Score;END; CLOSE cursor_product;DEALLOCATE cursor_product;

2. User scroll feature to select any line of returning set

select * from #studentDECLARE  @Class int, @Score int; DECLARE cursor_product CURSOR scrollFOR SELECT class, score FROM #Student; OPEN cursor_product; FETCH next FROM cursor_product INTO @Class,@Score; --next position of currentPRINT 'Class: '+ CAST(@Class AS varchar)+' Score: '+ CAST(@Score AS varchar);FETCH first FROM cursor_product INTO @Class,@Score; --very first onePRINT 'Class: '+ CAST(@Class AS varchar)+' Score: '+ CAST(@Score AS varchar);FETCH last FROM cursor_product INTO @Class,@Score; -- very last onePRINT 'Class: '+ CAST(@Class AS varchar)+' Score: '+ CAST(@Score AS varchar);FETCH prior FROM cursor_product INTO @Class,@Score; --current pos -1PRINT 'Class: '+ CAST(@Class AS varchar)+' Score: '+ CAST(@Score AS varchar);FETCH relative -5 FROM cursor_product INTO @Class,@Score; -- current pos -5PRINT 'Class: '+ CAST(@Class AS varchar)+' Score: '+ CAST(@Score AS varchar);FETCH absolute 6 FROM cursor_product INTO @Class,@Score; --the 6th of allPRINT 'Class: '+ CAST(@Class AS varchar)+' Score: '+ CAST(@Score AS varchar);CLOSE cursor_product;DEALLOCATE cursor_product;

 

 

Datetime 

1. Current date/datetime/UTC date, convert datetime to date only

select GETDATE()select GETUTCDATE()select cast(GETDATE() as date)  --date onlySELECT convert(date, GETDATE() ) --date only

2. Tomorrow/yesterday, next/last hour (simple nearby datetime)

-- add or minus is on day basisselect GETDATE()+1 --tomorrowselect GETDATE()-1 --yesterday-- need to be 24.0 to return floatselect GETDATE()+1.0/24 --next hourselect GETDATE()-1.0/24/2 --Last 30 min

3. Add/minus any period for a date (use with 4.datediff)

--result is already datetimeselect DATEADD(yy,-2,'07/23/2009 13:23:44') --2 years agoselect DATEADD(mm,5, DATEADD(dd,10,GETDATE())) --5 month and 10 days later

The datepart can be 'year' or 'yy' or 'yyyy', all same

4. Datediff of 2 datetime ( =2nd-1st, result is + or - interger)

select DATEDIFF(mi,GETDATE()+1.0/24,  GETDATE()-1.0/24)  -- return -120select DATEDIFF(dd,'2019-11-23', '2019-12-23')  --return 30

5. Generate any datetime

select cast('2019-10-23 23:30:59:883' as datetime) --'yyyy-mm-dd' select cast('2019/10/23 23:30:59:883' as datetime) --'yyyy/mm/dd' use ':' for msselect cast('10-23-2019 23:30:59.883' as datetime) --'mm-dd-yyyy' use '.' for msselect cast('10/23/2019 23:30:59.883' as datetime) --'mm/dd/yyyy'--same to use convertSELECT convert(date, '07/23/2009' )

6. Get day/week/month/year part of a datetime

--these pairs are same to get dd,mm,yy part of a datetime, return integerselect Datepart(dd,GETDATE()),day(GETDATE())select Datepart(mm,GETDATE()),month(GETDATE())select Datepart(yyyy,GETDATE()),year(GETDATE())select Datepart(dy,'2019-08-11') --get day of year: 223select datename(mm,'2000-5-17')  --return 'May'select datename(weekday,'2000-5-17') --return 'Wednesday'

7. Convert datetime format (input need to be datetime only, result is a string)

-- not working!!!! return '2019-05-17', as it detect input is string, 103 is ignoredselect convert(varchar, '2019-05-17', 103)--input is datetime, reutrn formatted string '17/05/2019'select convert(varchar, cast('2019-05-17' as datetime), 103)

for a full list of datetime format code (smilar to 103) 

DATE ONLY FORMATS
Format #	Query	Sample
1	select convert(varchar, getdate(), 1)	12/30/06
2	select convert(varchar, getdate(), 2)	06.12.30
3	select convert(varchar, getdate(), 3)	30/12/06
4	select convert(varchar, getdate(), 4)	30.12.06
5	select convert(varchar, getdate(), 5)	30-12-06
6	select convert(varchar, getdate(), 6)	30 Dec 06
7	select convert(varchar, getdate(), 7)	Dec 30, 06
10	select convert(varchar, getdate(), 10)	12-30-06
11	select convert(varchar, getdate(), 11)	06/12/30
12	select convert(varchar, getdate(), 12)	061230
23	select convert(varchar, getdate(), 23)	2006-12-30
101	select convert(varchar, getdate(), 101)	12/30/2006
102	select convert(varchar, getdate(), 102)	2006.12.30
103	select convert(varchar, getdate(), 103)	30/12/2006
104	select convert(varchar, getdate(), 104)	30.12.2006
105	select convert(varchar, getdate(), 105)	30-12-2006
106	select convert(varchar, getdate(), 106)	30 Dec 2006
107	select convert(varchar, getdate(), 107)	Dec 30, 2006
110	select convert(varchar, getdate(), 110)	12-30-2006
111	select convert(varchar, getdate(), 111)	2006/12/30
112	select convert(varchar, getdate(), 112)	20061230
TIME ONLY FORMATS
8	select convert(varchar, getdate(), 8)	00:38:54
14	select convert(varchar, getdate(), 14)	00:38:54:840
24	select convert(varchar, getdate(), 24)	00:38:54
108	select convert(varchar, getdate(), 108)	00:38:54
114	select convert(varchar, getdate(), 114)	00:38:54:840
DATE & TIME FORMATS
0	select convert(varchar, getdate(), 0)	Dec 12 2006 12:38AM
9	select convert(varchar, getdate(), 9)	Dec 30 2006 12:38:54:840AM
13	select convert(varchar, getdate(), 13)	30 Dec 2006 00:38:54:840AM
20	select convert(varchar, getdate(), 20)	2006-12-30 00:38:54
21	select convert(varchar, getdate(), 21)	2006-12-30 00:38:54.840
22	select convert(varchar, getdate(), 22)	12/30/06 12:38:54 AM
25	select convert(varchar, getdate(), 25)	2006-12-30 00:38:54.840
100	select convert(varchar, getdate(), 100)	Dec 30 2006 12:38AM
109	select convert(varchar, getdate(), 109)	Dec 30 2006 12:38:54:840AM
113	select convert(varchar, getdate(), 113)	30 Dec 2006 00:38:54:840
120	select convert(varchar, getdate(), 120)	2006-12-30 00:38:54
121	select convert(varchar, getdate(), 121)	2006-12-30 00:38:54.840
126	select convert(varchar, getdate(), 126)	2006-12-30T00:38:54.840
127	select convert(varchar, getdate(), 127)	2006-12-30T00:38:54.840

 

Delete duplicate rows (entire same or partialy same)

0. create example table

create table #Student (id int, Class int, Score int )insert into #Student values(1,1,88)insert into #Student values(2,1,66)insert into #Student values(3,2,30)insert into #Student values(4,2,70)insert into #Student values(5,2,60)insert into #Student values(6,3,70)insert into #Student values(7,3,80)

1. Select duplicate rows based on 1 column

select * from students where id in (    select id FROM students    group by id having count(*)>1)

 2. Select duplicate rows based on multiple columns

select * from students aright join (    select firstname, lastname from students    group by firstname, lastname having count(*)>1) bon a.firstname=b.firstname and a.lastname=b.lastname

3. Select rows that has unique combination of colums(filter out all duplicate rows)

select * from students except(    select a.* --need to select all columns herefrom students a    right join (        select firstname, lastname from students         group by firstname, lastname having count(*)>1    ) b    on a.firstname=b.firstnameand a.lastname =b.lastname )

4. Select/delete rows of totally identical values

select distinct * from tableName --save the result equals to delete duplicated rows already

5. Delete duplicate rows in table which has unique id

delete from #tempwhere id not in(    select   max(id)   from   #temp    group   by   col1, col2 --the columns used when checking duplicate    having count(*)>1)

6. Delete duplicate rows in table which does not have id

6.1 Delete directly from original table by "Partition" keyword

WITH tempVw AS (    SELECT         *,        ROW_NUMBER() OVER ( --over() is required for Row_Number()            PARTITION BY --this reset the rowNumber to 1 for different group                col1, col2 --which used as identifier to check duplicate            ORDER BY  --order by is required in Over()                col1, col2 --keep same as above        ) row_num     FROM         YourTable)delete FROM tempVw WHERE row_num > 1select * from YourTable --duplicated rows should be removed in original table

6.2 Add unique ID first so it is similar as point 5

--Use views to add rowId for table without unique idwith tempVw as(    select ROW_NUMBER() over (order by SurveyTypeid, surveyid ) as rowid,*    from YourTable)--define 2 views together, tempVw2 is all duplicated rows,tempVw2 as (    select rowid,a.col1,a.col2    from tempVw a    right join (        select col1, col2 from tempVw        group by col1, col2 having count(*)>1    ) b    on a.col1=b.col1 and a.col2=b.col2) --query after view, delete rows in view will delete original tabledelete  from tempVw where rowid in (    --return all duplicated rows except 1 row for each group that we will keep    select rowid from tempVw2 where rowid not in (        --return 1 row for each identifier of duplicated rows        select min (rowid) from tempVw2 group by col1, col2 having count(*)>1    ))select * from YourTable --duplicated rows should be removed in original table

 

 

Dynamic SQL (EXEC)

1. Query without quote

declare @sql varchar(max)= 'select * from #StudentMarks'exec (@sql)

2. If there is any single quote inside query, double it 

--the end has 3 quote because: double single quote + end quote of the query varchardeclare @sql varchar(max)= 'select *  from #StudentMarks where name=''Alice''' exec (@sql)

3. if you have single quote inside a string, you need doule it

-- output: 2019's, you need double the quote as it is in a string: 2019''sselect *,'2019''s' as category from #StudentMarks where name='Alice'declare @sql varchar(max)= 'select *,''2019''''s'' as category from #StudentMarks where name=''Alice'''exec (@sql)

4. If you add a number var to a dynamic query, you need to cast to varchar, no need for extra quote

declare @Math int=90declare @sql varchar(max)= 'select *  from #StudentMarks where Math='+cast(@Math as varchar)+' and Science=40'exec (@sql)

5. If you add a string var to a dynamic query, you need quote the input, and double the quote

declare @Name varchar(max)='Alice'--first 3 quotes = double the left quote of @Name + end quote of 1st part of query-- 4 quotes = start quote of 3rd part+ double the right quote of @Name + end quote of 3rd partdeclare @sql varchar(max)= 'select *  from #StudentMarks where name='''+@Name+''''exec (@sql)

6.  Connect multiple query string together

--double the left and right quote around Alice inside the querydeclare @sql2 varchar(max)=' where name = ''Alice'' '--do not forget to leave a space after each querydeclare @sql varchar(max)= 'select *  from #StudentMarks '+ @sql2exec (@sql)

 

 

Except (check difference between 2 tables of same colums) & Intersect

1. Rows which included in A but not B

Select * from A except Select * from B 

2. Return any diff bewteen A and B 

Select * from A except Select * from B union all Select * from B except Select * from A  

3. Return duplicated rows between A and B

Select * from A Intersect Select * from B

 

 

EXEC output to Variable

1. Using table variable

declare @temp table(id int,Name varchar(50),sex varchar(10))declare @sql varchar(max)= 'select id,name,''male'' from student where id<3'insert into @temp exec (@sql)

 2. Using sp_executesql 

DECLARE @sql nvarchar(1000), @input varchar(75)='Fenton', @output varchar(75)SET @sql = 'SELECT top 1 @firstname=firstname FROM [AspNetUsers] WHERE surname = @surname'EXECUTE sp_executesql @sql, N'@surname varchar(75),@firstname varchar(75) OUTPUT', @surname = @input, @firstname=@output OUTPUTselect @output 

 

 

Exists

1. To add any condition for the select (Same as if) 

Select col1, col2 from A where exists (Select 1 from B where id=99) --inside exists you can select 1 or anything, it will return TRUE equally

2. To select new user in A but not in B

Select id, name from A where not exists (Select 1 from B where B.id=A.id) --this equals to use IN keywordSelect id, name from A where id not in (Select id from B) 

 

 

Format

1.Mobile or phone number

select format([phone] ,'+##-###-###-###') --[phone]select format(0061414123456 ,'+##-###-###-###') --[phone]select format(0414123456 ,'+61-###-###-###') --[phone]

2.Number separator

select format(123456789,'#,#') --123,456,789select format(123456789,'#,#,') --123,457

3.Add 0 if necessary

select format(7081990, '0#######') --07081990select format(17081990,'0#######') --17081990

4. Decimal and percentage

select format(1234.5678,'#.##') --1234.57select format(1234.5678,'#%') --123457%

 

 

Group by (only work with count(), AVG(), MAX(), MIN(), Sum() )

--student number for each classselect class,count (*) as total from Student group by class --average score for each classselect class,avg(score) as AvgScore from Student group by class --highest score for each classselect class,max(score) as HighestScore from Student group by class --total donation for each classselect class,sum(donation) as TotalDonation from Student group by class 

 To get top x rows or the xth place in each group, use row_number()

 

 

Import data from excel

SELECT * --INTO #CarsFROM OPENROWSET('Microsoft.ACE.OLEDB.12.0','Excel 12.0 Xml;HDR=YES;Database=C:\cars.xlsx','SELECT * FROM [sheet1$]');

 

 

Indexing

1. 

 

 

Insert into 

1. Mutiple rows with values

insert into #temp(id,name) values (1,'Alice'),(2, 'Jack')

2. From existing tables

insert into #temp(id,name, sex) select id, name,'male' from students where sex=1 

3. From exec (Assign EXEC output to Variable)

declare @temp table(id int,Name varchar(50),sex varchar(10))declare @sql varchar(max)= 'select id,name,''male'' from student where id<3'insert into @temp exec (@sql)

 

 

Join

1. cross join

(https://blog.csdn.net/xiaolinyouni/article/details/6943337)

Select * from A cross join BSelect * from A,B --same as above

 

 

 2. Left join, right join, inner join

Left join: contains all rows from left table A, if A.key=B.key, return result in new table, if multiple B.key match A.key, return multiple rows, if no B.key match, return row with null values

 inner join: only return if A.key=B.key, can be one to one or one to many

 

 

Like and Regex

(http://www.sqlservertutorial.net/sql-server-basics/sql-server-like/)

• The percent wildcard (%): any string of zero or more characters.
• The underscore (_) wildcard: any single character.
• The [list of characters] wildcard: any single character within the specified set.
• The [character-character]: any single character within the specified range.
• The [^]: any single character not within a list or a range.

 Not start with special symbol, 3rd character is number or letter

Select * from where name LIKE ' [^.$#@-]_ [a-z0-9]%'

 

 

Login history delete for SSMS

C:\Users\*********\AppData\Roaming\Microsoft\SQL Server Management Studio\18.0\UserSettings.xml

• Open it in any Texteditor like Notepad++
• ctrl+f for the username to be removed
• then delete the entire <Element>.......</Element> block that surrounds it.

 

 

Pivot, unpivot (merge multiple cols or split into multiple cols)

1. Convert multiple columns into one

0. Create example table

Name Math Science English
Alice904060
Tom302010

CREATE TABLE #StudentMarks(Name varchar(100),Math int,Science int, English int)insert into #StudentMarks values('Alice',90,40,60)insert into #StudentMarks values('Tom',30,20,10)

1.1 Result

name subject marks
AliceMath90
AliceScience40
AliceEnglish60
TomMath30
TomScience20
TomEnglish10

1.2 Convert multiple columns into one (unpivot)

--can be any col in #studentmarks + subject+ marksselect  name, subject, marks from #studentmarks  unpivot(  marks --marks: actual values  for subject in (Math, Science, English) --subject: col names) a  

1.3 Convert multiple columns into one (cross join)

select name, subject,     case subject --this select the right subject score value to put in new col    when 'Maths' then math    when 'Science' then science    when 'English' then english    end as Marksfrom #studentmarksCross Join (values('Maths'),('Science'),('English')) AS Subjct(Subject)

 2. Split one column value to different columns 

if it is static and only a few diff values, use "case when" (search 'case when' in blog)

 0. Create sample example

CREATE TABLE #Source(    [Id] [int] IDENTITY(1,1) NOT NULL,    [Name] [varchar](50) NULL,    [FieldCode] [varchar](50) NULL,    [Value] int NULL) ON [PRIMARY]INSERT INTO #Source([Name],[FieldCode],[Value])     SELECT 'Alice','English',60  UNION ALL    SELECT 'Jack','Math',70  UNION ALL    SELECT 'Tom','Science',80  UNION ALL    SELECT 'Tom','Math',75  UNION ALL    SELECT 'Tom','English',57  UNION ALL    SELECT 'Jack','English',80  UNION ALL    SELECT 'Alice','Science',100

2.1 Pivot to dynamic split one col to multiple

--**rename the reference col as name, sourceCol as 'fieldcode', value as 'value'DECLARE    @SourceTable VARCHAR(500)='#Source'DECLARE    @place_holder_len VARCHAR(500)='1000'--*****if get error 'String or binary data would be truncated', need increase size of this str--1000 length, this is random string placeholder of the col data length when using PIVOT function DECLARE @place_holder VARCHAR(8000)= space(@place_holder_len); --this should work as above--The max len of varchar is 8000, so need to divide sql str into a few varcharDECLARE @sql_current_str VARCHAR(8000) =''DECLARE @sql_str1 VARCHAR(8000) =''DECLARE @sql_str2 VARCHAR(8000) =''DECLARE @sql_str3 VARCHAR(8000) =''DECLARE @sql_str4 VARCHAR(8000) =''DECLARE @sql_str5 VARCHAR(8000) =''DECLARE @sql_str6 VARCHAR(8000) =''DECLARE @sql_str7 VARCHAR(8000) =''DECLARE @sql_str8 VARCHAR(8000) =''DECLARE @sql_str9 VARCHAR(8000) =''DECLARE @sql_str10 VARCHAR(8000) =''DECLARE @sql_str998 VARCHAR(8000) ='' --to replace the placeholder to empty string and select resultDECLARE @sql_str999 VARCHAR(8000) ='' --to replace the placeholder to empty string and select resultDECLARE @all_survey_data_cols VARCHAR(8000)DECLARE @col VARCHAR(8000)='' --current col in loop of all the cols           DECLARE @count int =1              DECLARE @index int =1DECLARE @FieldTable Table (fieldcode varchar(1000))SET @sql_str1 = 'select distinct (fieldcode) from '+ @SourceTable +' (nolock)'Insert @FieldTable Exec (@sql_str1) select *,ROW_NUMBER() over (order by fieldcode)  as i into #Field_ASC from (select * from @FieldTable) aselect @count=max(i) from #Field_ASCselect @all_survey_data_cols = ISNULL(@all_survey_data_cols + ',','') + QUOTENAME(fieldcode) FROM (select fieldcode from #Field_ASC) aSET @sql_str1 = '    SELECT distinct name,data.*  into #temp    FROM '+ @SourceTable +'    inner join (        SELECT * FROM         (select fieldcode,'''+@place_holder+''' as zz from #Field_ASC) p  PIVOT         (max(zz) FOR fieldcode IN ( '+ @all_survey_data_cols +') ) AS pvt     ) data  on 1=1'while (@index<@count+1)begin    select @col = fieldcode  from #Field_ASC where i=@index    --this is to divide the sql string as max size of varchar is 8000    if (len(@sql_str9)>7000)    begin         set @sql_current_str= @sql_str10    end    else if (len(@sql_str8 )>7000)    begin         set @sql_current_str= @sql_str9    end    else if (len(@sql_str7 )>7000)    begin         set @sql_current_str= @sql_str8    end    else if (len(@sql_str6 )>7000)    begin         set @sql_current_str= @sql_str7    end    else if (len(@sql_str5 )>7000)    begin         set @sql_current_str= @sql_str6    end    else if (len(@sql_str4 )>7000)    begin         set @sql_current_str= @sql_str5    end    else if (len(@sql_str3 )>7000)    begin         set @sql_current_str= @sql_str4    end    else if (len(@sql_str2 )>7000)    begin         set @sql_current_str= @sql_str3    end    else if (len(@sql_str1 )>7000)    begin         set @sql_current_str= @sql_str2    end    else    begin        set @sql_current_str= @sql_str1    end    set @sql_current_str =@sql_current_str +'        update  a        set a.['+@col+']=  CONVERT(varchar(8000), b.value)        from #temp a        inner join (select *   from '+ @SourceTable +' (nolock)            ) b        on a.name=b.name and b.fieldcode='''+@col+ ''''         --this is to divide the sql string as max size of varchar is 8000    if (len(@sql_str9)>7000)    begin         set @sql_str10 = @sql_current_str    end    else if (len(@sql_str8 )>7000)    begin         set @sql_str9 = @sql_current_str    end    else if (len(@sql_str7 )>7000)    begin         set @sql_str8 = @sql_current_str    end    else if (len(@sql_str6 )>7000)    begin         set @sql_str7 = @sql_current_str    end    else if (len(@sql_str5 )>7000)    begin         set @sql_str6 = @sql_current_str    end    else if (len(@sql_str4 )>7000)    begin         set @sql_str5 = @sql_current_str    end    else if (len(@sql_str3 )>7000)    begin         set @sql_str4 = @sql_current_str    end    else if (len(@sql_str2 )>7000)    begin         set @sql_str3 = @sql_current_str    end    else if (len(@sql_str1 )>7000)    begin         set @sql_str2 = @sql_current_str    end    else    begin        set @sql_str1 = @sql_current_str    end    set @index=@index+1endset @index=1while (@index<@count+1)begin    select @col = fieldcode from #Field_ASC where i=@index    if (len(@sql_str998)>7000) --if exceed 8000 size then store the rest in new str    begin        set @sql_str999 =@sql_str999 +' update #temp set ['+ @col  +'] ='''' where  len(['+ @col+'])  =0'  --replace placeholder by ''    end    else    begin        set @sql_str998 =@sql_str998 +' update #temp set ['+ @col  +'] ='''' where  len(['+ @col+'])   =0'--replace placeholder by ''    end    set @index=@index+1endset @sql_str999 =@sql_str999 + '  select * from #temp'PRINT ( @sql_str1 + @sql_str2+ @sql_str3 + @sql_str4 + @sql_str5 + @sql_str6 + @sql_str7+ @sql_str8 + @sql_str9 + @sql_str10 + @sql_str998+ @sql_str999 ) EXEC ( @sql_str1 + @sql_str2+ @sql_str3 + @sql_str4 + @sql_str5 + @sql_str6 + @sql_str7+ @sql_str8 + @sql_str9 + @sql_str10 + @sql_str998+ @sql_str999 ) --to check if the sql string is overflowprint ('string 1: ' + cast (len ( @sql_str1 ) as varchar(100)) + ' string 2: ' +  cast (len ( @sql_str2) as varchar(100)) +' string 3: ' +  cast (len ( @sql_str3 ) as varchar(100))+' string 4: ' +  cast (len ( @sql_str5 ) as varchar(100))+' string 5: ' +   cast (len ( @sql_str5 ) as varchar(100)) +' string 6: ' + cast (len ( @sql_str6 ) as varchar(100)) + ' string 7: ' +  cast (len ( @sql_str7) as varchar(100)) +' string 8: ' +  cast (len ( @sql_str8 ) as varchar(100))+' string 9: ' +  cast (len ( @sql_str9 ) as varchar(100))+' string 10: ' +   cast (len ( @sql_str10 ) as varchar(100)) +' string 998: ' +   cast (len ( @sql_str998 ) as varchar(100))+' string 999: ' + cast (len ( @sql_str999 ) as varchar(100)))drop table #Field_ASC

View Code

 

 

Random id (GUID), string, number

1. Random Guid

select NEWID() --315FC5A3-BE07-41BB-BE4F-75055729FA5B

2. Random string

SELECT CONVERT(varchar(255), NEWID())

3. Random number (round to integer)

SELECT RAND() -- 0<=decimal<1 SELECT RAND()*15+5; -- 5<=decimal<20 (if include 20 need *16)SELECT FLOOR(22.6) --22SELECT CEILING(22.6) --23SELECT ROUND(22.6,0) -- 23.0SELECT ROUND(22.6,-1) --20.0 

 

 

Row_number(), Rank() and Dense_rank() (must use with over(order by ...) )

1. Add row id by row_number()

select *,row_number() over(order by class) rowid from #Student  

 2. if there is identiacal value for the colomn used for order by: Rank() and Dense_rank()

select *,rank() over(order by class) rowid from #Student --if 1st has 2 pp, next is 3rdselect *,dense_rank() over(order by class) rowid from #Student --if 1st has 2 pp, next is 2nd

  

 3. Partition by: Assign row id for different group, each group start with 1

select *,row_number() over(partition by class order by class) rowid from #Student

 4. Select top 2, the 2nd second place for each group

select * from (    select *,row_number() over(partition by class order by class) rowid from #Student  )a where rowid<2select * from (    select *,row_number() over(partition by class order by class) rowid from #Student  )a where rowid=2

 

 

Search any "keyword" in database

1. Search keyword for all cols in one table

USE [YourDB]GOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGO/*    [SearchOneTable]  'ASPnetusers','2019'    [SearchOneTable]  'ASPnetusers','8',1,1,0*/CREATE PROC [dbo].[SearchOneTable](    @TableName nvarchar(256),    @Keyword nvarchar(100),    @SearchDate bit=0,    @SearchNumber bit=0,    @SearchString bit=1    )ASBEGIN    SET NOCOUNT ON    if PARSENAME(@TableName, 2) is null    begin        set @TableName = 'dbo.' + QUOTENAME(@TableName, '"')    end        SET @Keyword  = QUOTENAME('%' + @Keyword + '%','''')    DECLARE @ColumnName nvarchar(128) = ''    DECLARE @ColumnNameTableVar table(ColumnName nvarchar(128)) --table var to store exec result into var    DECLARE @sql varchar(max)=''    DECLARE @StringTypes varchar(1000)='''char'', ''varchar'', ''nchar'', ''nvarchar'''    DECLARE @DateTypes varchar(1000)='''date'', ''time'', ''datetime'', ''timestamp'''    DECLARE @NumberTypes varchar(1000)='''int'', ''decimal'', ''float'', ''bit'''    DECLARE @results TABLE(ColumnName nvarchar(370), ColumnValue nvarchar(3630))    IF @TableName <> ''    BEGIN        WHILE (@TableName IS NOT NULL) AND (@ColumnName IS NOT NULL)        BEGIN            set @sql='SELECT MIN(QUOTENAME(COLUMN_NAME))                FROM  INFORMATION_SCHEMA.COLUMNS                WHERE  TABLE_SCHEMA    = PARSENAME('''+@TableName+''', 2)                    AND  TABLE_NAME    = PARSENAME('''+@TableName+''', 1)                    AND  QUOTENAME(COLUMN_NAME) > '''+@ColumnName+'''                    AND  DATA_TYPE IN (' +                         case when @SearchDate=1 and @SearchNumber=0 then @DateTypes +' , '                            when @SearchDate=0 and @SearchNumber=1 then @NumberTypes +' , '                            when @SearchDate=1 and @SearchNumber=1 then @DateTypes +' , ' + @NumberTypes +' , '                            else ' ' end                    + case when @SearchString=1 then @StringTypes else '''''' end                    + ')'            delete from @ColumnNameTableVar --empty table first            insert into @ColumnNameTableVar exec (  @sql )            select top 1 @ColumnName=ColumnName from @ColumnNameTableVar                    IF @ColumnName IS NOT NULL            BEGIN                  INSERT INTO @results                EXEC                (                    'SELECT ''' + @TableName + '.' + @ColumnName + ''', LEFT(' + @ColumnName + ', 3630)                     FROM ' + @TableName + ' WITH (NOLOCK) ' +                    ' WHERE ' + @ColumnName + ' LIKE ' + @Keyword                )            END        END        END            SELECT ColumnName, ColumnValue FROM @resultsENDGO

View Code

 2. Search keyword for all cols in all tables (Extremely slow!!!) 

USE [YourDB]GOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGO/********don't use it in large db, which will be extremely slow**********    [SearchAllTables] 'survey' */CREATE PROC [dbo].[SearchAllTables](    @Keyword nvarchar(100),    @SearchDate bit=0,    @SearchNumber bit=0,    @SearchString bit=1)ASBEGIN        SET NOCOUNT ON    SET @Keyword = QUOTENAME('%' + @Keyword + '%','''')    CREATE TABLE #Results (ColumnName nvarchar(370), ColumnValue nvarchar(3630))    DECLARE @TableName nvarchar(256)=''    DECLARE @ColumnName nvarchar(128)     DECLARE @ColumnNameTableVar table(ColumnName nvarchar(128)) --table var to store exec result into var    DECLARE @sql varchar(max)=''    DECLARE @StringTypes varchar(1000)='''char'', ''varchar'', ''nchar'', ''nvarchar''  '    DECLARE @DateTypes varchar(1000)='''date'', ''time'', ''datetime'', ''timestamp'''    DECLARE @NumberTypes varchar(1000)='''int'', ''decimal'', ''float'', ''bit'''    WHILE @TableName IS NOT NULL    BEGIN        SET @ColumnName = ''        SET @TableName =         (            SELECT MIN(QUOTENAME(TABLE_SCHEMA) + '.' + QUOTENAME(TABLE_NAME))            FROM     INFORMATION_SCHEMA.TABLES            WHERE         TABLE_TYPE = 'BASE TABLE'                AND    QUOTENAME(TABLE_SCHEMA) + '.' + QUOTENAME(TABLE_NAME) > @TableName                AND    OBJECTPROPERTY(                        OBJECT_ID(                            QUOTENAME(TABLE_SCHEMA) + '.' + QUOTENAME(TABLE_NAME)                             ), 'IsMSShipped'                               ) = 0        )        WHILE (@TableName IS NOT NULL) AND (@ColumnName IS NOT NULL)        BEGIN            set @sql='SELECT MIN(QUOTENAME(COLUMN_NAME))                FROM  INFORMATION_SCHEMA.COLUMNS                WHERE  TABLE_SCHEMA    = PARSENAME('''+@TableName+''', 2)                    AND  TABLE_NAME    = PARSENAME('''+@TableName+''', 1)                    AND  QUOTENAME(COLUMN_NAME) > '''+@ColumnName+'''                    AND  DATA_TYPE IN (' +                         case when @SearchDate=1 and @SearchNumber=0 then @DateTypes +' , '                            when @SearchDate=0 and @SearchNumber=1 then @NumberTypes +' , '                            when @SearchDate=1 and @SearchNumber=1 then @DateTypes +' , ' + @NumberTypes +' , '                            else ' ' end                    + case when @SearchString=1 then @StringTypes else '''''' end                    + ')'            delete from @ColumnNameTableVar --empty table first            insert into @ColumnNameTableVar exec (  @sql )            select top 1 @ColumnName=ColumnName from @ColumnNameTableVar                IF @ColumnName IS NOT NULL            BEGIN                INSERT INTO #Results                EXEC                (                    'SELECT ''' + @TableName + '.' + @ColumnName + ''', LEFT(' + @ColumnName + ', 3630)                     FROM ' + @TableName + 'WITH (NOLOCK) ' +                    ' WHERE ' + @ColumnName + ' LIKE ' + @Keyword                )            END        END        END    SELECT ColumnName, ColumnValue FROM #ResultsENDGO

View Code

3. Search keyword for all the cols name in all tables

--to search "keyword" in any cols, in any tables of dbSELECTb.name as tables, a.name as colsFROMsys.columns as a inner join sys.tables as b on a.object_id=b.object_idwhere a.name like '%keyword%'order by b.name

4. Search keyword in whole text of the proc (may not working very well if proc is very long)

--to search "keyword" in stored procedure whole textSELECT ROUTINE_NAME, ROUTINE_DEFINITIONFROM INFORMATION_SCHEMA.ROUTINESWHERE ROUTINE_DEFINITION LIKE '%keyword%'AND ROUTINE_TYPE='PROCEDURE'

 

 

Short Keys for text selection

(https://www.mssqltips.com/sqlservertip/2786/column-and-block-text-selection-using-sql-server-management-studio/)

1. Using SHIFT+ALT+(arrow key or cursor) to Select block of values among multiple rows

2. Using CTRL+SHIFT+END to Select Text till end (CTRL+ END can move cursor to end)

3. Using CTRL+SHIFT+HOME to Select Text till start (CTRL+HOME can move cursor to end)

4. User CTRL+ arrow key can move cursor jump between words not letters

 

 

String edit

Note: SQL index start from 1 not 0

1. left and right

select left('hello world',5) --return: helloselect right('hello world!',6) --return:world!

2. Substring

select substring('hello world',7,5) --return: world

3. Replace (by expression or by index)

select REPLACE('123456','34','new') --return 12new56select stuff('123456',3,2,'new') --same as above, start index=3, length=2

4. Split (not exist in sql, need use LEFT+ RIGHT + CHARINDEX)

--split 'hello world' by spaceselect left('hello world',CHARINDEX(' ','hello world')-1) select right('hello world',len('hello world')-CHARINDEX(' ','hello world'))

5. Delete white space

SELECT LTRIM('   Sample   '); --return 'Sample 'SELECT RTRIM('   Sample   '); --return ' Sample'

6. Delete enter, tab, space

--char(13)+CHAR(10) = enterprint 'first line'+char(13)+CHAR(10)+'Second line' --2 lines--char(9) is tab, the outsode replace delete all spaceprint REPLACE(REPLACE(REPLACE(REPLACE('first lineSecond line',CHAR(13),''),CHAR(10),''),CHAR(9),''),' ','')

 
 is newline in XML, try search it if still newline

7. Search a regex in string

SELECT PATINDEX('%[mo]%', 'W3Schools.com'); --return m or o which appear first

8. Repeat string a few times

select REPLICATE('hello world ',3) --return: hello world hello world hello world  

9. Revers a string by characters

select REVERSE('1234567') --return 7654321

10. Create an empty fixed length string (only contains spaces)

select 'a'+SPACE(5)+'b' --return a     b

 

 

Top

1. select rows between m and n place of highest score

select top 2 * from ( --between 4 and 5, 5-4+1=2    select top 5 * from #Student order by score desc)aorder by score  

 2. Select 2nd second place by add row_number()

-- if there are multiple highest score, will select highest scoreselect * from (    select *,row_number() over( order by score desc) rowid from #Student  )a where rowid=2--if there are multiple highest score, still select second highest score select * from (    select *,rank() over( order by score desc) rowid from #Student  )a where rowid=2
-- rowid between m and n -- rows between order of the m place to n place 

 

 

Transaction

1. Begin, rollback,commit tran

Declare @isDebug bit=0begin tran-- insert/update/delete queries    if @isDebug=0 and @@error=0 --prod run and no errorsbegin    commit tranendelse -- test run or any errorbegin    rollback tranend

2. trasaction with try/catch

Declare @isDebug bit=1BEGIN TRY    BEGIN tran            if @isDebug=0 --test run        begin             -- insert/update/delete queries            end        else --prod run        begin            -- insert/update/delete queries        end    COMMIT tran --commit if above code has no errorEND TRYBEGIN CATCH    ROLLBACK tran --if any error jump to this to rollback    select ERROR_NUMBER() as ErrorNumber, ERROR_MESSAGE() as ErrorMessage, ERROR_PROCEDURE() as ErrorProcedureEND CATCH

 

 

Output (to log result along with query)

1. You can output deleted or inserted rows with the query

CREATE TABLE #temp (ID INT, Val VARCHAR(100))  INSERT #temp (ID, Val)  VALUES (1,'FirstVal')  INSERT #temp (ID, Val)  VALUES (2,'SecondVal')  CREATE TABLE #log (ID INT, Val VARCHAR(100), Query VARCHAR(100))   SELECT * FROM #temp INSERT #temp (ID, Val) output inserted.ID,inserted.Val,'Insert' into #log VALUES (3,'ThirdVal')  --you can also output both deleted and inserted valuesUpdate #temp set Val='NewVal' output Deleted.ID, Deleted.Val,'Delete' into #logwhere id=3Update #temp set Val='NewVal' output inserted.ID,inserted.Val,'Insert' into #logwhere id=3DELETE FROM #temp  OUTPUT Deleted.ID, Deleted.Val,'Delete'  into #log WHERE ID IN (1,2)   SELECT * FROM #log  SELECT * FROM #temp DROP TABLE #temp  DROP TABLE #log

 

 

 Union, Union All

1. Union not return duplicated rows (by duplicated mean all the values are exactly same)

2. Union All return all rows include duplicated rows

3. Both Union and Union all need to have exactly same number of total columns (col name can be diff but type need to be same)

4. Union All is much faster than Union

 

 

Update one colomn from column in another table

UPDATE  aSET     a.marks = b.marksFROM    tempDataView a        INNER JOIN tempData b            ON a.Name = b.Name

 

 

Variables (declare, set, select)

1. Declare multiple vars and initialize the value

declare @a int =1, @b varchar(max)='abc'

2. Set can only set single values 

set @a=2

3. Set values by using query

set @a=(select 2)

4. Select can assign value to multiple vars

select @a=2, @b='new'

5. Select to assign values by query

select top 1 @a=ClientId, @b=Surname from [AspNetUsers]

 6. EXEC to a variable

DECLARE @sql nvarchar(1000), @input varchar(75)='Fenton', @output varchar(75)SET @sql = 'SELECT top 1 @firstname=firstname FROM [AspNetUsers] WHERE surname = @surname'EXECUTE sp_executesql @sql, N'@surname varchar(75),@firstname varchar(75) OUTPUT', @surname = @input, @firstname=@output OUTPUTselect @output 

 

 

View (with ... as (CTE_query))  

CTE=Common Table Expression

**delete or update view will influence original table, delete or update or insert values to original table will influence on view

with StudentVw as(    select top 100 ROW_NUMBER() over (order by SurveyTypeid, surveyid ) as rowid,*    from ##temp order by channelid -- if use order by must have top keyword)select * from StudentVw --must come with a query and only 1 query

 

 

ZZZZ Examples

0. Create Sample tables

CREATE TABLE students(sno VARCHAR(3) NOT NULL, sname VARCHAR(4) NOT NULL,ssex VARCHAR(2) NOT NULL, sbirthday DATETIME,class VARCHAR(5))CREATE TABLE courses(cno VARCHAR(5) NOT NULL, cname VARCHAR(10) NOT NULL, tno VARCHAR(10) NOT NULL)CREATE TABLE scores (sno VARCHAR(3) NOT NULL, cno VARCHAR(5) NOT NULL, degree NUMERIC(10, 1) NOT NULL) CREATE TABLE teachers (tno VARCHAR(3) NOT NULL, tname VARCHAR(4) NOT NULL, tsex VARCHAR(2) NOT NULL, tbirthday DATETIME NOT NULL, prof VARCHAR(60), depart VARCHAR(100) NOT NULL)INSERT INTO STUDENTS (SNO,SNAME,SSEX,SBIRTHDAY,CLASS) VALUES (108 ,'aa' ,'m' ,'1977-09-01',95033);INSERT INTO STUDENTS (SNO,SNAME,SSEX,SBIRTHDAY,CLASS) VALUES (105 ,'bb' ,'m' ,'1975-10-02',95031);INSERT INTO STUDENTS (SNO,SNAME,SSEX,SBIRTHDAY,CLASS) VALUES (107 ,'cc' ,'f' ,'1976-01-23',95033);INSERT INTO STUDENTS (SNO,SNAME,SSEX,SBIRTHDAY,CLASS) VALUES (101 ,'dd' ,'m' ,'1976-02-20',95033);INSERT INTO STUDENTS (SNO,SNAME,SSEX,SBIRTHDAY,CLASS) VALUES (109 ,'ee' ,'f' ,'1975-02-10',95031);INSERT INTO STUDENTS (SNO,SNAME,SSEX,SBIRTHDAY,CLASS) VALUES (103 ,'ff' ,'m' ,'1974-06-03',95031);INSERT INTO COURSES(CNO,CNAME,TNO)VALUES ('3-105' ,'computer',825);INSERT INTO COURSES(CNO,CNAME,TNO)VALUES ('3-245' ,'os' ,804);INSERT INTO COURSES(CNO,CNAME,TNO)VALUES ('6-166' ,'data' ,856);INSERT INTO COURSES(CNO,CNAME,TNO)VALUES ('9-888' ,'math' ,100);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (103,'3-245',86);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (105,'3-245',75);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (109,'3-245',68);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (103,'3-105',92);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (105,'3-105',88);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (109,'3-105',76);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (101,'3-105',64);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (107,'3-105',91);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (108,'3-105',78);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (101,'6-166',85);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (107,'6-106',79);INSERT INTO SCORES(SNO,CNO,DEGREE)VALUES (108,'6-166',81);INSERT INTO TEACHERS(TNO,TNAME,TSEX,TBIRTHDAY,PROF,DEPART) VALUES (804,'uu','m','1958-12-02','pro','computer depart');INSERT INTO TEACHERS(TNO,TNAME,TSEX,TBIRTHDAY,PROF,DEPART) VALUES (856,'vv','m','1969-03-12','lecture','electric depart');INSERT INTO TEACHERS(TNO,TNAME,TSEX,TBIRTHDAY,PROF,DEPART) VALUES (825,'ww','f','1972-05-05','assis','computer depart');INSERT INTO TEACHERS(TNO,TNAME,TSEX,TBIRTHDAY,PROF,DEPART) VALUES (831,'xx','f','1977-08-14','assis','electric depart'); 

View Code

1. Find student sno, who enroll in both 105 and 245

SELECT  [sno]FROM [DashboardShaperData_64].[dbo].[scores] where cno='3-105' or cno='3-245'group by sno  having count(*)>1  

2. Find students sno whose 105 degree is higher than 245 degree

SELECT  a.sno,a.degree as '105', b.degree as "245"FROM (select sno,degree from scores   where cno='3-105' )a inner join(select sno,degree from scores   where cno='3-245')b on a.sno=b.snowhere a.degree>b.degree 

--return 1