Multi-Row Pano Elements Package, LR

This Multi-Row Pano Elements Package combines elements of our PG-02 Pano-Gimbal heads with the single-row panorama components from our Pano Elements to create a full-size and super-capable multi-row kit. The adjustability and strength of the PG-02 vertical arm allows it to be the perfect offset tilt axis allowing for centering the lens for panorama shooting while holding firm at any angle. With complete laser-engraved 2.5-degree scales on the pan and tilt axes, and a built-in level on the horizontal components, this package is ready to setup on top of your leveling base or ballhead via its built-in dovetail and be shooting in just seconds.
 
The PC-LR Panning clamp is designed to offer precision horizontal panning as a versatile built-in or modular accessory. Combining our patented lever-release clamp jaw with a lockable 360-degree panning bearing, the PC-LR is a robust yet lightweight panning solution for panorama shooting. Like all of our lever-release clamps, the PC-LR offers the fastest action for quick-release of plates and rails in and out of the jaw. With a patented stainless-steel lever that flips to three positions: closed, half-open, full-open - you can be confident in the state of the clamp at a glance.
 
The CB-10 Camera Bar provides the horizontal arm for mounting the vertical components of the package, and is robust enough to handle and camera/lens combination without deflection. Featuring continuous top and bottom dovetails, a laser-engraved scale for repeatable positioning, and a built-in spirit level, the CB-10 makes the perfect bridge between the two major axes of the Multi-Row Pano Elements Packages. At 10 inches long, it's enough clearance to allow centering even using the 'tallest' camera bodies with vertical grips.
 
The PG-02 VA operates as the vertical tilt axis component and is robust enough to operate with just about any size camera and lens combination. The large star-shaped lock knob provides sure-fire grip for easy one-twist lockup, even with gloved hands, and provides over 50 pounds of lockup capacity at any angle. The robust tilt bearing inside the Vertical Arm is compact and lightweight but offers silky-smooth movement with even high weight mounted. A laser-engraved scale provides precise tilt positioning.
 
Our patented B2-LR-II lever-release clamp provides secure mounting for any Really Right Stuff lens foot, plate, or rail, with complete 360-degree tilting range. With a precise laser-engraved scale, the clamp offers no-parallax positioning with ease.
 
The MPR-CL II is our second-generation 'standard' nodal slide rail with integral clamp. At 7.4' (189mm) long, the MPR-CL II provides no-parallax point positioning for non-collared lenses from 16mm and up on a full frame (35mm) camera. The built-in screw-knob style clamp allows mounting a camera body fitted with any Really Right Stuff camera base plate or L-plate, with center reference marks for precise alignment. A built-in spirit level at the front end provides high-visibility leveling indication. A laser-engraved scale on either side allows for precise positioning relative to the reference mark in the clamp below.