重点节选 2.5 PREFORMED, PREFINISHED SHOWER BASES AND ENCLOSURESMaterials used in the manufacture of preformed, prefinished shower bases and enclosures shall be such that the finished product is waterproof.预制底盘的规定。注意：没有在规范中发现预制防水墙体的条款，所以采用宣称防水的预制卫浴墙体，仍需要符合规范中关于墙体部分的防水要求。3.3 FALLS IN FLOOR FINISHESWhere required, falls in floor finishes shall allow all surface water to drain without ponding except for residual water remaining due to surface tension.For general bathroom floor area, the minimum fall to the waste shall be 1:100.NOTES:1 For information on falls in the floor finishes, see Appendix B.2 For information on the laying of tiles to enable them to drain without retaining water, see AS 3958.1.关于地面最小坡度3.4 SHOWER FLOORSFalls in shower floors shall be sufficient to prevent—(a) surface water from being retained on the shower floor (except for residual water remaining due to surface tension); and(b) water from discharging outside the shower area.For shower areas with a vertical separation between the shower area and the wet area, such as a shower screen, hob, step-down or water stop, the fall to the waste shall be 1:100.As a minimum for other shower areas, the fall shall be a minimum of 1:80.淋浴区的最小坡度
Wet Areas
An area within a building supplied with water from a water supply system, which includes bathrooms, showers, laundries and sanitary compartments and excludes kitchens, bar areas,kitchenettes or domestic food and beverage preparation areas.漏水是一个项目最失败的表现之一，如何通过合理的设计，减少漏水的风险？
