黄杨木雕在修光过程中，往往在较长的褶缝边角、凹凸地方，很难处理掉杂屑，要达到彻底、整洁利落，就必须用勒剔切割法除去杂屑。勒、剔、切、割是一把雕刀的四种用法。该法是将这四种刀法并用，方法是用三指握刀，刀尖靠左，刀口向右，以刀尖入木，进刀时右手腕灵活用力，左手四指握住作品，以左手拇指推刀背，朝右往刀口方向前进，以这种方式勒刀，上施切一刀，下施切一刀，清除未净，再用反方向剔割。另一种握法，即右手四指并拢握住刀柄，大拇指顶在斜形柄端，刀口向外，用左手拇指推刀背，左手四指握作品，朝外施切。再左右各一刀，将杂屑割除。勒、剔、切、割要顺黄杨木木纹进行。
In the process of polishing, it is often difficult to remove debris in the long corner of folds and concave and convex places. To achieve thorough and neat, it is necessary to remove debris by leeching and cutting method. Le, pick, cut and cut are four uses of a carving knife. This method combines these four kinds of knife methods. The method is to hold the knife with three fingers, the knife tip is left, the knife edge is right, the knife tip enters the wood, the right wrist is flexible when entering the knife, the left hand four fingers grasp the work, push the knife back with the left thumb, and move towards the right knife edge. In this way, the knife is strangled, the upper knife is cut, the lower knife is cut, and the unfinished knife is removed. Net, then cut in the opposite direction. Another method is to hold the handle of the knife with the four fingers of the right hand together. The top of the thumb is at the oblique handle end. The knife edge is outward. The back of the knife is pushed with the left thumb. The work is grasped with the four fingers of the left hand and cut outward. Then cut the debris with one knife left and right. Le, pick, cut and cut along the boxwood grain.
联系客服
