| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
序号 | 德国标准 | 中文品名 | 英文品名 | 国际标准 | 中国标准 |
69 | DIN601 | 六角头螺栓 | Hexagon blots | ISO4016 | |
70 | DIN603 | 大半圆头方颈螺栓(马车螺栓) | Mushroom head square neck bolts(carriage bolts) | ISO8677 | GB14-88 |
71 | DIN604 | 沉头带插销马车 | Flat countersunk nib bolts | | |
72 | DIN605 | 沉头长方颈马车 | Flat countersunk long squareneck bolts | | |
73 | DIN607 | 半圆头带插销马车螺栓 | Cup head nib bolts | | |
74 | DIN608 | 沉头短方颈马车 | Flat countersunk short square neck bolts | | |
75 | DIN609 | 六角头精配螺栓 | Hexagon fitted bolts,long thread | | |
76 | DIN610 | 六角头精配螺栓 | Hexagon fitted bolts short thread | | |
77 | DIN653 | 滚花平头螺钉 | Knurled thumb screws thin type | | GB835-88 |
78 | DIN660 | 半圆头铆钉 | Round head rivets | ISO1051 | GB867-86 |
79 | DIN661 | 沉头铆钉 | Contersunk head rivets | ISO1051 | GB869-86 |
80 | DIN662 | 半沉头铆钉 | Raised contersunk head rivets | ISO1051 | |
81 | DIN674 | 大扁头铆钉 | Mushroom head rivets | ISO1051 | |
82 | DIN703 | 重型侧面带孔圆螺母 | Adjusting rings,heavy range(shafting collars) | | |
83 | DIN705 | 侧面带孔圆螺母 | Adjusting rings,light range(shafting collars) | | GB816-88 |
84 | DIN741 | 卡头 | Wire rope clips | | |
85 | DIN787 | T型槽螺钉 | T-slot screws | ISO299 | |
86 | DIN835 | 双头螺柱 | Studs-metal(end=2d) | | GB900-88 |
87 | DIN906 | 内六角锥型闭锁 | Hexagon socket pipe plugs,conical thread | | |
88 | DIN908 | 内六角直型闭锁 | Thread | | |
89 | DIN909 | 外六角锥型闭锁 | Thread | | |
90 | DIN910 | 外六角直型闭锁 | Hexagon head screw plugs,cyl.thread | | |
91 | DIN911 | 内六角扳手 | Socket wrenches | ISO2936 | |
92 | DIN912 | 内六角圆柱头螺钉 | Hexagon socket cap screws | ISO4762 | GB70-85 |
93 | DIN913 | 内六角平端紧定 | Hexagon socket set screws with falt point | ISO4026 | GB77-85 |
94 | DIN914 | 内六角尖端紧定 | Hexagon socket set screws with cone point | ISO4027 | GB78-85 |
95 | DIN915 | 内六角圆柱端紧定螺钉 | Hexagon socket set screws with dog point | ISO4028 | GB79-85 |
96 | DIN916 | 内六角凹端紧定螺钉 | Hexagon socket set screws with cup point | ISO4029 | GB80-85 |
97 | DIN917 | 薄型盲螺母 | Hexagon cap nuts | | |
98 | DIN920 | 开槽小圆柱头螺钉 | Slotted short cheese head screws | | |
99 | DIN921 | 开槽大圆柱头螺钉 | Slotted large cheese head screws | | GB838-88 |
100 | DIN923 | 开槽圆柱头轴肩 | Slotted pan head screw with shoulder | | GB830-88 |
101 | DIN927 | 开槽无头轴肩螺钉 | Slotted shoulder screws | | |
102 | DIN928 | 焊接方螺母 | Square weld nuts | | GB/T13680-92 |
103 | DIN929 | 焊接六角螺母 | Hexagon weld nuts | | GB/T13681-92 |
104 | DIN931 | 六角头螺栓 | Hexagon head screws | ISO4014 | GB5782-86 |
105 | DIN933 | 六角头螺栓 | Hexagon head screws | ISO4017 | GB5783-86 |
106 | DIN934 | 六角头螺母(1型) | Hexagon full nuts | ISO4032 | GB6170-86 |
107 | DIN934 | 细牙六角头螺母(1型) | Hexagon full nuts | ISO8673 | GB6171-86 |
108 | DIN935 | 开槽六角螺母 | Hexagon slotted and castle nuts | ISO7035 | GB6178-86 |
109 | DIN936 | 六角头薄螺母 | Hexagon thin nuts | ISO4035 | GB6172.1-86 |
110 | DIN937 | 六角头开槽薄螺母 | Hexagon thin slotted and caslte nuts | ISO7038 | GB6181-86 |
111 | DIN938 | 双头螺距 | Studs metal(end=1d) | | GB897-88 |
112 | DIN939 | 双头螺距 | Studs metal(end=1.25d) | | GB898-88 |
113 | DIN940 | 双头螺距 | Studs metal(end=1.5d) | | |
114 | DIN960 | 六角头细牙螺栓 | Hexagon head bolts,metric fine pitch thread | ISO8765 | GB5785-86 |
115 | DIN961 | 六角头细牙螺栓 | Hexagon head bolts,metric fine pitch thread | ISO8676 | GB8786-86 |
116 | DIN962 | 头部穿孔六角头 | Additional shapes and versions for bolts | | |
117 | DIN963 | 开槽沉头螺钉 | Slotted countersund head screws | ISO2009 | GB68-85 |
118 | DIN964 | 开槽半沉头螺钉 | Slotted raised countersunk oval head screws | ISO2010 | GB69-85 |
119 | DIN965 | 十字槽沉头螺钉 | Cross recessed countersunk head screws | ISO7046 | GB819-85 |
120 | DIN966 | 十字槽半沉头螺钉 | Cross recessed raised Countersunk head screws | ISO7047 | GB820-85 |
121 | DIN970 | 六角头螺母 | Hexagon nuts type-1 | | |
122 | DIN971 | 六角头螺母 | Hexagon nuts type-2 | | |
123 | DIN972 | 细牙六角头螺母(2型) | Hexagon nuts with fine thread | | |
124 | DIN975 | 牙条(全螺纹) | Threaded rods(studdings) | ISO8674 | GB6176-86 |
125 | DIN976 | 螺纹销 | Threaded pins(stud bolts) | | GB15389-94 |
126 | DIN979 | 六角头开槽薄螺母(2型) | Hexagon thin slotted and castle nuts | | |
127 | DIN980 | 全金属六角锁紧螺母(1型) | Prevaillng rorque type hexagon nuts,all metal nuts | | |
128 | DIN981 | 圆螺母 | Locknuts | ISO7199 | GB6184-86 |
129 | DIN982 | 六角头尼龙锁紧螺母 | Prevailing rorque type hexagon nuts,heavy type,with nylon | ISO2982 | GB812-88 |
130 | DIN985 | 六角头薄型尼龙锁紧螺母 | Prevalling torque type hoxagon nuts,heavy type,with nylon | ISO7040 | GB889.1-86 |
131 | DIN986 | 六角盖型尼龙锁紧螺母 | Preailling torque typedomed capnuts with nylon insert | ISO10511 | GB6172.2-86 |
132 | DIN988 | 配合垫片 | Shim rings | | |
133 | DIN1052 | 木材连接用垫片 | Washers for timber connectors | | |
134 | DIN1151 | 沉头钢钉 | Round plain head nails | | |
135 | DIN1440 | 销钉专用垫片A型 | Plain washers for clevis pins(A型) | ISO8738 | |
136 | DIN1441 | 销钉专用垫片 | Plain washers for clevis pins | | |
137 | DIN1444 | 带头销钉 | Clevis pins with head | ISO2341 | |
序号 | 德国标准 | 中文品名 | 英文品名 | 国际标准 | 中国标准 |
138 | DIN1471 | 圆锥型槽销 | Grooved pins,taper grooved | ISO8744 | GB/T13829.2 |
139 | DIN1472 | 圆锥型槽销 | Grooved pins,taper grooved half length | ISO8745 | GB/T13829.2 |
140 | DIN1473 | 平行槽销 | Grooved pins,parallel grooved full length | ISO8740 | |
141 | DIN1474 | 前端凹槽槽销 | Grooved pins,reverve grooved half length | ISO8741 | |
142 | DIN1475 | 中部凹槽槽销 | Grooved pins,center grooved | ISO8742 | |
143 | DIN1476 | 圆头槽销 | Grooved pins with round head | ISO8746 | |
144 | DIN1477 | 沉头槽销 | Grooved pins with countersunk head | ISO8747 | |
145 | DIN1479 | 六角螺母棒 | Turnuckles(center parts),made out of hexagon bar | | |
146 | DIN1480 | 花蓝螺栓 | Turnuckles with eye bolt and hook bolt | | |
147 | DIN1481 | 弹性圆柱销 | Spring pins,heavy type | ISO8752 | GB879-86 |
148 | DIN1587 | 组合式盖型螺母 | Hexagon domed cap nuts | | GB802-88 |
149 | DIN1804 | 开槽圆螺母 | Slotted round nuts for hook spammer | | |
150 | DIN1816 | 圆螺母(带插销孔) | Round nuts with set holes | | |
151 | DIN2093 | 盘型弹簧垫圈 | Disc springs | | |
152 | DIN3017 | 喉箍 | Hose clamps | | |
153 | DIN3404 | 润滑油嘴 | Lubricating nipples,button head | | |
154 | DIN3567 | 管夹 | Shackles for conduilts | | |
155 | DIN3570 | U型螺栓 | Stirrup bolts(U-bolts) | | |
156 | DIN6319 | 球面垫圈 | Spherical washers,conical seats | | GB849-88 |
157 | DIN6325 | 圆柱销 | Parallel pins | ISO8734 | |
158 | DIN6330 | 厚六角螺母 | Hexagon nuts,1.5d | | GB56-88 |
159 | DIN6331 | 厚六角法兰面 | Hexagon nuts,1.5d with collar | | GB6177-86 |
160 | DIN6334 | 长六角螺母 | Hexagon nuts,3d | | |
161 | DIN6797-A | 外齿锁紧垫圈 | External teeth lock washers | | GB862.1-87 |
162 | DIN6797-I | 内齿锁紧垫圈 | Internal teeth lock washers | | GB861.1-87 |
163 | DIN6798-A | 外锯齿锁紧垫圈 | External teeth serrated lock washers | | GB862.2-87 |
164 | DIN6798-I | 内锯齿锁紧垫圈 | Internal teeth serrated lock washers | | GB861.2-87 |
165 | DIN6799 | 开口挡圈 | Retaining rings for shafts(E-rings),circlips | | GB896-76 |
166 | DIN6885 | 平键(A型) | Parallel keys(form A) | ISO773/2491 | |
167 | DIN6888 | 半圆键 | Woodruff keys | ISO3912 | |
168 | DIN6899 | 嵌环(支撑环) | Thimbles | | |
169 | DIN6900 | 机器螺钉和垫圈 | Screws and washers assemblies | | |
170 | DIN6901 | 自攻螺钉和垫圈 | Tapping screws and washer assemblies | | GB9074.1-17 |
171 | DIN6912 | 薄型带孔 | Hexagon cocket head cap screws with hole,low head | | GB9074.18-23 |
172 | DIN6914 | 大六角头螺栓 | Hexagon head bolts with large head | | |
173 | DIN6915 | 大六角螺母 | Hexagon nuts with large wideth across flat | | |
174 | DIN6916 | 大垫圈 | Round washers for friction grip bolts | | |
175 | DIN6917 | 楔型方垫圈 | Spuare taper washers for friction grip bolts on T- | | |
176 | DIN6923 | 六角法兰面螺母 | Hexagon flange nuts | ISO4161 | GB6187-86 |
177 | DIN6925 | 全金属六角锁紧螺母(2型) | Prevailing torque type hexagon nuts,all metallic nuts | ISO7042 | GB6185.1-2000 |
181 | DIN7346 | 轻型弹性圆柱销 | Spring pins,light type | ISO13337 | |
182 | DIN7349 | 重型弹性圆柱 | Washers for bolts with heavy type spring pinss | | |
183 | DIN7500 | ISO公制螺纹螺钉(多种头型) | Thread forming screws for ISO-metric thread | | |
184 | DIN7504 | 自攻自钻螺钉 | Self-drilling tapping screws | | |
185 | DIN7513 | 开槽切削螺纹螺钉(多种头型) | Thread cutting screws | | |
186 | DIN7516 | 十字槽切削螺纹螺钉(多种头型) | Thread cutting screws cross recess | | |
187 | DIN7965 | T型四爪螺母 | Tee nuts with pronge | | |
188 | DIN7968 | 钢结构用六角头螺栓连接副 | Hexagon head fitted bolts for steel structures | | GB1228/1229/1230 |
189 | DIN7971 | 开槽盘头 | Pan head tapping screws with slot | ISO1481 | GB5282-85 |
190 | DIN7972 | 开槽沉头 | countersunk flat head tapping screws with slot | ISO1482 | GB5283-85 |
191 | DIN7973 | 开槽半沉头 | Raised sountersunk oval head tapping screws with slot | ISO1483 | GB5284-85 |
192 | DIN7976 | 六角头自攻螺钉 | Hexagon tapping screws | ISO1479 | GB5285-85 |
193 | DIN7980 | 圆柱头螺钉用 | Spring lock washers for screws with cylindrical heads | ISO8738 | |
194 | DIN7981 | 十字槽盘头 | Pan head tapping screws with cross recessed | ISO7049 | GB845-85 |
195 | DIN7982 | 十字槽沉头 | Countersunk flat head tapping screws with cross recessed | ISO7050 | GB846-85 |
196 | DIN7983 | 十字槽半沉头 | Raised countersunk oval head tapping screws with cross | ISO7051 | GB847-86 |
197 | DIN7984 | 薄型内六角 | Hexagon socket head cap screws with,reduced head | | |
198 | DIN7985 | 十字槽盘头螺钉 | Pan head screws with cross recessed | ISO7045 | GB818-85 |
199 | DIN7989 | 钢结构用垫圈 | Washers for steel structures | | GB1230-84 |
200 | DIN7990 | 钢结构用 | Hexagon head bolts for steel structures | | GB1229-84 |
201 | DIN7991 | 内六角沉头螺钉 | Hexagon socket coutersunk head screws | ISO10642 | |
202 | DIN7993 | 轴用钢丝挡圈 | Roundwire snap rings for shafts | | GB895.2-86 |
203 | DIN7995 | 十字槽半沉头 | Cross recessed raised countersunk head wood screws | | GB952-86 |
204 | DIN7996 | 十字槽圆头 | Cross recessed round head wood screws | | GB950-86 |
205 | DIN7997 | 十字槽沉头 | Cross recessed countersunk head wood screws | | GB951-86 |
206 | DIN8140 | 螺纹护套 | Ciol inserts,coarse,fine thread,silf locking | | |
207 | DIN9021 | 大外径垫圈 | Washers,outside diameter appro.3d | ISO7093 | GB96-85 |
208 | DIN11024 | 弹簧卡子 | sping cotter for a bolt | | |
209 | DIN13257 | 平板螺栓 | Belting bolts | | |
210 | DIN18182 | 干壁钉 | Dry wall screws | | |
211 | DIN28129 | 环型螺母 | Lifting nuts(eye nuts) | | GB63-88 |
212 | DIN70952 | 圆螺母用止退 | Tab washer for slotted round nuts | | GB/858-88 |
联系客服