Table A1 Recommended spare parts for internal combustion engines for propulsion of ships for unrestricted service
Item
Specification
Number recommended
一、Main bearings
Main bearings or shells for one bearing of each size and type fitted, complete with shims, bolts
and nuts
1
二、Main thrust block
Pads for one face of tilting type thrust block, or 1 set
三、Main thrust block
Complete with metal thrust shoe of solid ring type, or 1
四、Main thrust block
Inner and outer race with rollers, where roller thrust bearings are fitted 1
五、Cylinder liner
Cylinder liner, complete with joint rings and gaskets 1
六、Cylinder cover
Cylinder cover, complete with valves, joint rings, gaskets and rocker arms with brackets. For
engines without covers, the respective valves for one cylinder unit 1
七、Cylinder cover
Cylinder cover bolts and nuts, for one cylinder 1/2 set
八、Cylinder valves-
Exhaust valves, complete with casings, seats, springs and other fittings for one cylinder 2 sets
九、Air inlet valve, complete with casings, seats, springs and other fittings for one cylinder 1set
十、Cylinder valves-
Starting air valve, complete with casing, seat, spring and other fittings 1
十一、Cylinder valves-
Cylinder overpressure sentinel valve, complete 1
十二、Cylinder valves-
Fuel valves of each size and type fitted, complete with all fittings, for one engine 2set
十三、Connecting rod bear-ings
Bottom end bearings or shells of each size and type fitted, complete with shims, bolts andnuts, for one cylinder 1 set
十四、Connecting rod bear-ings
Top end bearings or shells of each size and type fitted, complete with shims, bolts and nuts,for one cylinder 1 set
十五、Pistons
Crosshead type: Piston of each type fitted, complete with piston rod, stuffing box, skirt,rings, studs and nuts 1
十六、Pistons
Trunk piston type: Piston of each type fitted, complete with skirt, rings, studs, nuts, gudgeon pin and connecting rod 1
十七、Piston rings
Piston rings, for one cylinder 1 set
十八、Piston cooling
Telescopic cooling pipes and fittings or their equivalent, for one cylinder unit 1 set
十九、Cylinder lubricators
Lubricator, complete, of the largest size, with its chain drive or gear wheels 1
二十、Fuel injection pumps
Fuel pump complete or, when replacement at sea is practicable, a complete set of working parts for one pump (plunger, sleeve, valves, springs, etc.) 1
二十一、Fuel injection piping
High pressure fuel pipe of each size and shape fitted, complete with couplings 1
二十二、Scavenge blowers(including turbo-chargers)
Rotors, rotor shafts, bearings, nozzle rings and gear wheels or equivalent working parts if oth-er types 1 set
二十三、Scavenging system
Suction and delivery valves for one pump of each type fitted 1 set
二十四、Reduction and/or re-verse gear
Complete bearing bush, of each size fitted in the gear case assembly 1 set
二十五、Reduction and/or re-verse gear
Roller or ball race, of each size fitted in the gear case assembly 1 set
二十六Main engine driven
air compressors Piston rings of each size fitted 1 set
二十七、Main engine driven
air compressors Suction and delivery valves complete of each size fitted 1/2 set
二十八、Gaskets and packing
Special gaskets and packing of each size and type fitted for cylinder covers and cylinder liners for one cylinder -
备注:
1) In case of multi-engine installations, the minimum recommended spares are only necessary for one engine.
2)
a) Engines with one or two fuel valves pr. cylinder: one set of fuel valves, complete
b) Engines with three or more fuel valves pr. cylinder: two fuel valves complete per cylinder and sufficient number of valve parts, excluding the body, to form with, those fitted in the complete valves, a full engine set.
3) The spare parts may be omitted where it has been demonstrated , at the builders test bench for one engine of the type concerned, that the engine can be manoeuvred satisfactorily with one blower out of action.
The requisite blanking and blocking arrangements for running with one blower out of action are to be available on board.
联系客服