物料科学 | Material Science |
物料科学定义 | Material Science Definition |
加工性能 | Machinability |
强度 | Strength |
抗腐蚀及耐用 | Corrosion & resistance durability |
金属特性 | Special metallic features |
抗敏感及环境保护 | Allergic, re-cycling & environmental protection |
化学元素 | Chemical element |
元素的原子序数 | Atom of Elements |
原子及固体物质 | Atom and solid material |
原子的组成、大小、体积和单位图表 | The size, mass, charge of an atom, and is particles (Pronton,Nentron and Electron) |
原子的组织图 | Atom Constitutes |
周期表 | Periodic Table |
原子键结 | Atom Bonding |
金属与合金 | Metal and Alloy |
铁及非铁金属 | Ferrous & Non Ferrous Metal |
金属的特性 | Features of Metal |
晶体结构 | Crystal Pattern |
晶体结构,定向格子及单位晶格 | Crystal structure, Space lattice & Unit cell |
X线结晶分析法 | X – ray crystal analyics method |
金属结晶格子 | Metal space lattice |
格子常数 | Lattice constant |
米勒指数 | Mill’s Index |
金相及相律 | Metal Phase and Phase Rule |
固熔体 | Solid solution |
置换型固熔体 | Substitutional type solid solution |
插入型固熔体 | Interstital solid solution |
金属间化物 | Intermetallic compound |
金属变态 | Transformation |
变态点 | Transformation Point |
磁性变态 | Magnetic Transformation |
同素变态 | Allotropic Transformation |
合金平衡状态 | Thermal Equilibrium |
相律 | Phase Rule |
自由度 | Degree of freedom |
临界温度 | Critical temperture |
共晶 | Eutectic |
包晶温度 | Peritectic Temperature |
包晶反应 | Peritectic Reaction |
包晶合金 | Peritectic Alloy |
亚共晶体 | Hypoeutetic Alloy |
过共晶体 | Hyper-ectectic Alloy |
金属的相融、相融温度、晶体反应及合金在共晶合金、固熔孻共晶合金及偏晶反应的比较 | Equilibrium Comparision |
金属塑性 | Plastic Deformation |
滑动面 | Slip Plan |
畸变 | Distortion |
硬化 | Work Hardening |
退火 | Annealing |
回复柔软 | Crystal Recovery |
再结晶 | Recrystallization |
金属材料的性能及试验 | Properties & testing of metal |
化学性能 | Chemical Properties |
物理性能 | Physical Properties |
颜色 | Colour |
磁性 | Magnetisum |
比电阻 | Specific resistivity & specific resistance |
比重 | Specific gravity & specific density |
比热 | Specific Heat |
热膨胀系数 | Coefficient of thermal expansion |
导热度 | Heat conductivity |
机械性能 | Mechanical properties |
屈服强度(降伏强度) | (Yield strangth) |
弹性限度、阳氏弹性系数及屈服点 | elastic limit, Yeung’s module of elasticity to yield point |
伸长度 | Elongation |
断面缩率 | Reduction of area |
金属材料的试验方法 | The Method of Metal inspection |
不破坏检验 | Non – destructive inspections |
渗透探伤法 | Penetrate inspection |
磁粉探伤法 | Magnetic particle inspection |
放射线探伤法 | Radiographic inspection |
超声波探伤法 | Ultrasonic inspection |
显微观察法 | Microscopic inspection |
破坏的检验 | Destructive Inspection |
冲击测试 | Impact Test |
疲劳测试 | Fatigue Test |
潜变测试 | Creep Test |
潜变强度 | Creeps Strength |
第壹潜变期 | Primary Creep |
第二潜变期 | Secondary Creep |
第三潜变期 | Tertiary Creep |
主要金属元素之物理性质 | Physical properties of major Metal Elements |
工业标准及规格 – 铁及非铁金属 | Industrial Standard – Ferrous & Non – ferrous Metal |
磁力 | Magnetic |
简介 | General |
软磁 | Soft Magnetic |
硬磁 | Hard Magnetic |
磁场 | Magnetic Field |
磁性感应 | Magnetic Induction |
透磁度 | Magnetic Permeability |
磁化率 | Magnetic Susceptibility (Xm) |
磁力 | (Magnetic Force) |
及磁场 | (Magnetic Field) |
是因物料里的电子 | (Electron) |
活动而产生抗磁体、顺磁体、铁磁体、反铁磁体及亚铁磁体 | Diamagnetism, Paramagnetic Ferromagnetism, Antiferromagnetism & Ferrimagnetism |
抗磁体 | Diamagnetism |
磁偶极子 | Dipole |
负磁力效应 | Negative effect |
顺磁体 | Paramagnetic |
正磁化率 | Positive magnetic susceptibility |
铁磁体 | Ferromagnetism |
转变元素 | Transition element |
交换能量 | Positive energy exchange |
外价电子 | Outer valence electrons |
化学结合 | Chemical bond |
自发上磁 | Spontaneous magnetization |
磁畴 | Magnetic domain |
相反旋转 | Opposite span |
比较抗磁体、顺磁体及铁磁体 | Comparison of Diamagnetism, Paramagnetic & Ferromagnetism |
反铁磁体 | Antiferromagnetism |
亚铁磁体 | Ferrimagnetism |
磁矩 | magnetic moment |
疲劳测试 | Fatigue Test |
潜变测试 | Creep Test |
潜变强度 | Creeps Strength |
第壹潜变期 | Primary Creep |
第二潜变期 | Secondary Creep |
第三潜变期 | Tertiary Creep |
主要金属元素之物理性质 | Physical properties of major Metal Elements |
工业标准及规格 – 铁及非铁金属 | Industrial Standard – Ferrous & Non – ferrous Metal |
磁力 | Magnetic |
简介 | General |
软磁 | Soft Magnetic |
硬磁 | Hard Magnetic |
磁场 | Magnetic Field |
磁性感应 | Magnetic Induction |
透磁度 | Magnetic Permeability |
磁化率 | Magnetic Susceptibility (Xm) |
磁力 | (Magnetic Force) |
及磁场 | (Magnetic Field) |
是因物料里的电子 | (Electron) |
活动而产生抗磁体、顺磁体、铁磁体、反铁磁体及亚铁磁体 | Diamagnetism, Paramagnetic Ferromagnetism, Antiferromagnetism & Ferrimagnetism |
抗磁体 | Diamagnetism |
磁偶极子 | Dipole |
负磁力效应 | Negative effect |
顺磁体 | Paramagnetic |
正磁化率 | Positive magnetic susceptibility |
铁磁体 | Ferromagnetism |
转变元素 | Transition element |
交换能量 | Positive energy exchange |
外价电子 | Outer valence electrons |
化学结合 | Chemical bond |
自发上磁 | Spontaneous magnetization |
磁畴 | Magnetic domain |
相反旋转 | Opposite span |
比较抗磁体、顺磁体及铁磁体 | Comparison of Diamagnetism, Paramagnetic & Ferromagnetism |
反铁磁体 | Antiferromagnetism |
亚铁磁体 | Ferrimagnetism |
磁矩 | magnetic moment |
净磁矩 | Net magnetic moment |
钢铁的主要成份 | The major element of steel |
钢铁用"碳"之含量来分类 | Classification of Steel according to Carbon contents |
铁相 | Steel Phases |
钢铁的名称 | Name of steel |
纯铁体 | Ferrite |
渗碳体 | Cementitle |
奥氏体 | Austenite |
珠光体及共释钢 | Pearlite &Eutectoid |
奥氏体碳钢 | Austenite Carbon Steel |
单相金属 | Single Phase Metal |
共释变态 | Eutectoid Transformation |
珠光体 | Pearlite |
亚铁释体 | Hyppo-Eutectoid |
初释纯铁体 | Pro-entectoid ferrite |
过共释钢 | Hype-eutectoid |
珠光体 | Pearlite |
粗珠光体 | Coarse pearlite |
中珠光体 | Medium pearlite |
幼珠光体 | Fine pearlite |
磁性变态点 | Magnetic Transformation |
钢铁的制造 | Manufacturing of Steel |
连续铸造法 | Continuous casting process |
电炉 | Electric furnace |
均热炉 | Soaking pit |
全静钢 | Killed steel |
半静钢 | Semi-killed steel |
沸腾钢(未净钢) | Rimmed steel |
钢铁生产流程 | Steel Production Flow Chart |
钢材的熔铸、锻造、挤压及延轧 | The Casting, Fogging, Extrusion, Rolling & Steel |
熔铸 | Casting |
锻造 | Fogging |
挤压 | Extrusion |
延轧 | Rolling |
冲剪 | Drawing & stamping |
特殊钢 | Special Steel |
简介 | General |
特殊钢以原素分类 | Classification of Special Steel according to Element |
特殊钢以用途来分类 | Classification of Special Steel according to End Usage |
易车(快削)不锈钢 | Free Cutting Stainless Steel |
含铅易车钢 | Leaded Free Cutting Steel |
含硫易车钢 | Sulphuric Free Cutting Steel |
硬化性能 | Hardenability |
钢的脆性 | Brittleness of Steel |
低温脆性 | Cold brittleness |
回火脆性 | Temper brittleness |
日工标准下的特殊钢材 | Specail Steel according to JIS Standard |
铬钢 – 日工标准JIS G4104 | Chrome steel to JIS G4104 |
铬钼钢钢材 – 日工标准 G4105 62 | Chrome Molybdenum steel to JIS G4105 |
镍铬 – 日工标准 G4102 63 | Chrome Nickel steel to JIS G4102 |
镍铬钼钢 – 日工标准G4103 64 | Nickel, Chrome & Molybdenum Steel to JIS G4103 |
高锰钢铸 – 日工标准 | High manganese steel to JIS standard |
片及板材 | Chapter Four-Strip, Steel & Plate |
冷辘低碳钢片(双单光片)(日工标准 JIS G3141) 73 - 95 | Cold Rolled (Low carbon) Steel Strip (to JIS G 3141) |
简介 | General |
美材试标准的冷辘低碳钢片 | Cold Rolled Steel Strip American Standard – American Society for testing and materials (ASTM) |
日工标准JIS G3141冷辘低碳钢片(双单光片)的编号浅释 | Decoding of cold rolled(Low carbon)steel strip JIS G3141 |
材料的加工性能 | Drawing abillity |
硬度 | Hardness |
表面处理 | Surface finish |
冷辘钢捆片及张片制作流程图表 | Production flow chart cold rolled steel coil sheet |
冷辘钢捆片及张片的电镀和印刷方法 | Cold rolled steel coil & sheet electro-plating & painting method |
冷辘(低碳)钢片的分类用、途、工业标准、品质、加热状态及硬度表 | End usages, industrial standard, quality, condition and hardness of cold rolled steel strip |
硬度及拉力 | Hardness & Tensile strength test |
拉伸测试(顺纹测试) | Elongation test |
杯突测试(厚度: 0.4公厘至1.6公厘,准确至0.1公厘 3个试片平均数) | Erichsen test (Thickness: 0.4mm to 1.6mm, figure round up to 0.1mm) |
曲面(假曲率) | Camber |
厚度及阔度公差 | Tolerance on Thickness & Width |
平坦度(阔度大于500公厘,标准回火) | Flatness (width>500mm, temper: standard) |
弯度 | Camber |
冷辘钢片储存与处理提示 | General advice on handling & storage of cold rolled steel coil & sheet |
防止生锈 | Rust Protection |
生锈速度表 | Speed of rusting |
焊接 | Welding |
气焊 | Gas Welding |
埋弧焊 | Submerged-arc Welding |
电阻焊 | Resistance Welding |
冷辘钢片(拉力: 30-32公斤/平方米)在没有表面处理状态下的焊接状况 | Spot welding conditions for bared (free from paint, oxides etc) Cold rolled mild steel sheets(T/S:30-32 Kgf/ μ m2) |
时间效应(老化)及拉伸应变 | Aging & Stretcher Strains |
日工标准(JIS G3141)冷辘钢片化学成份 | Chemical composition – cold rolled steel sheet to JIS G3141 |
冷辘钢片的"理论重量"计算方程式 | Cold Rolled Steel Sheet – Theoretical mass |
日工标准(JIS G3141)冷辘钢片重量列表 | Mass of Cold-Rolled Steel Sheet to JIS G3141 |
冷辘钢片订货需知 | Ordering of cold rolled steel strip/sheet |
其它日工标准冷轧钢片(用途及编号) | JIS standard & application of other cold Rolled Special Steel |
电镀锌钢片或电解钢片 | Electro-galvanized Steel Sheet/Electrolytic Zinc Coated Steel Sheet |
简介 | General |
电解/电镀锌大大增强钢片的防锈能力 | Galvanic Action improving Weather & Corrosion Resistance of the Base Steel Sheet |
上漆能力 | Paint Adhesion |
电镀锌钢片的焊接 | Welding of Electro-galvanized steel sheet |
点焊 | Spot welding |
滚焊 | Seam welding |
电镀锌(电解)钢片 | Electro-galvanized Steel Sheet |
生产流程 | Production Flow Chart |
常用的镀锌钢片(电解片)的基层金属、用途、日工标准、美材标准及一般厚度 | Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet |
锌镀层质量 | Zinc Coating Mass |
表面处理 | Surface Treatment |
冷轧钢片 | Cold-Rolled Steel Sheet/Strip |
热轧钢片 | Hot-Rolled Sheet/Strip |
电解冷轧钢片厚度公差 | Thickness Tolerance of Electrolytic Cold-rolled sheet |
热轧钢片厚度公差 | Thickness Tolerance of Hot-rolled sheet |
冷轧或热轧钢片阔度公差 | Width Tolerance of Cold or Hot-rolled sheet |
长度公差 | Length Tolerance |
理论质量 | Theoretical Mass |
锌镀层质量(两个相同锌镀层厚度) | Mass Calculation of coating (For equal coating)/MM |
锌镀层质量(两个不同锌镀层厚度) | Mass Calculation of coating (For differential coating)/MM |
镀锡薄铁片(白铁皮/马口铁) (日工标准 JIS G3303) 简介 | General |
镀锡薄铁片的构造 | Construction of Electrolytic Tinplate |
镀锡薄钢片(白铁皮/马日铁)制造过程 | Production Process of Electrolytic Tinplate |
锡层质量 | Mass of Tin Coating (JIS G3303-1987) |
两面均等锡层 | Both Side Equally Coated Mass |
两面不均等锡层 | Both Side Different Thickness Coated Mass |
级别、电镀方法、镀层质量及常用称号 | Grade, Plating type, Designation of Coating Mass & Common Coating Mass |
镀层质量标记 | Markings & Designations of Differential Coatings |
硬度 | Hardness |
单相轧压镀锡薄铁片(白铁皮/马口铁) | Single-Reduced Tinplate |
双相辗压镀锡薄钢片(马口铁/白铁皮) | Dual-Reduction Tinplate |
钢的种类 | Type of Steel |
表面处理 | Surface Finish |
常用尺寸 | Commonly Used Size |
电器用硅 [硅] 钢片 | Electrical Steel Sheet |
简介 | General |
软磁材料 | Soft Magnetic Material |
滞后回线 | Narrow Hystersis |
矫顽磁力 | Coercive Force |
硬磁材料 | Hard Magnetic Material |
最大能量积 | Maximum Energy Product |
硅含量对电器用的低碳钢片的最大好处 | The Advantage of Using Silicon low Carbon Steel |
晶粒取向 | (Grain-Oriented) |
及非晶粒取向 | (Non-Oriented) Grain Oriented & Non-Oriented |
电器用硅 [硅] 钢片的最终用途及规格 | End Usage and Designations of Electrical Steel Strip |
电器用的硅 [硅] 钢片之分类 | Classification of Silicon Steel Sheet for Electrical Use |
电器用钢片的绝缘涂层 | Performance of Surface Insulation of Electrical Steel Sheets |
晶粒取向电器用硅钢片主要工业标准 | International Standard – Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use |
晶粒取向电器用硅钢片 | Grain-Oriented Electrical Steel |
晶粒取向,定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数(日工标准及美材标准) | Magnetic Properties and Lamination Factor of SI-ORIENT-CORE& SI-ORIENT-CORE-HI B Electrical Steel Strip (JIS and AISI Standard) |
退火 | Annealing |
电器用钢片用家需自行应力退火原因 | Annealing of the Electrical Steel Sheet |
退火时注意事项 | Annealing Precautionary |
碳污染 | Prevent Carbon Contamination |
热力应先从工件边缘透入 | Heat from the Laminated Stacks Edges |
提防过份氧化 | No Excessive Oxidation |
应力退火温度 | Stress –relieving Annealing Temperature |
晶粒取向电器用硅 [硅] 钢片 – 高硼(HI-B)定取向芯钢片及定取向芯钢片之机械性能及夹层系数 | Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets |
晶粒取向电器用硅 [硅] 钢;片 – 高硼低硫(LS)定取向 钢片之磁力及电力性能 | Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-L S |
晶粒取向电器用硅 [硅] 钢片 – 高硼低硫(LS) 定取向钢片之机械性能及夹层系数 | Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-L S |
晶粒取向电器用硅(硅)钢片-高硼(HI-B)定取向 芯钢片,定取向芯钢片及高硼低硫(LS)定取向芯钢片之厚度及阔度公差 | Physical Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CORE, & SI-CORE-HI-B-LS Grain Oriented Electrical Steel Sheets |
绝缘表面 | Surface Insulation |
非晶粒取向电力用钢片的电力、磁力、机械性能 及夹层系数 | Lamination Factors of Electrical, Magnetic & Mechanical Non-Grain Oriented Electrical |
电器及家电外壳用镀层冷辘 [低碳] 钢片 | Coated (Low Carbon) Steel Sheets for Casing,Electricals& Home Appliances |
镀铝硅钢片 | Aluminized Silicon Alloy Steel Sheet |
简介 | General |
镀铝硅合金钢片的特色 | Feature of Aluminized Silicon Alloy Steel Sheet |
用途 | End Usages |
抗化学品能力 | Chemical Resistance |
镀铝(硅)钢片 – 日工标准(JIS G3314) | Hot-aluminum-coated sheets and coils to JIS G 3314 |
镀铝(硅)钢片 – 美材试标准(ASTM A-463-77)35.7 JIS G3314镀热浸铝片的机械性能 | Mechanical Properties of JIS G 3314 Hot-Dip Aluminum-coated Sheets and Coils |
公差 | Size Tolerance |
镀铝(硅)钢片及其它种类钢片的抗腐蚀性能比较 | Comparsion of various resistance of aluminized steel & other kinds of steel |
镀铝(硅)钢片生产流程 | Aluminum Steel Sheet, Production Flow Chart |
焊接能力 | Weldability |
镀铝钢片的焊接状态(比较冷辘钢片) | Tips on welding of Aluminized sheet in comparasion with cold rolled steel strip |
钢板 | Steel Plate |
钢板用途分类及各国钢板的工业标准包括日工标准及美材试标准 | Type of steel Plate & Related JIS, ASTM and Other Major Industrial Standards |
钢板生产流程 | Production Flow Chart |
钢板订货需知 | Ordering of Steel Plate |
不锈钢 | Stainless Steel |
不锈钢的定义 | Definition of Stainless Steel |
不锈钢之分类,耐腐蚀性及耐热性 | Classification, Corrosion Resistant & Heat Resistance of Stainless Steel |
铁铬系不锈钢片 | Chrome Stainless Steel |
马氏体不锈钢 | Martensite Stainless Steel |
低碳马氏体不锈钢 | Low Carbon Martensite Stainless Steel |
含铁体不锈钢 | Ferrite Stainless Steel |
镍铬系不锈钢 | Nickel Chrome Stainless Steel |
释出硬化不锈钢 | Precipitation Hardening Stainless Steel |
铁锰铝不锈钢 | Fe / Mn / Al / Stainless Steel |
不锈钢的磁性 | Magnetic Property & Stainless Steel |
不锈钢箔、卷片、片及板之厚度分类 | Classification of Foil, Strip, Sheet & Plate by Thickness |
表面保护胶纸 | Surface protection film |
不锈钢片材常用代号 | Designation of SUS Steel Special Use Stainless |
表面处理 | Surface finish |
薄卷片及薄片(0.3至2.9mm厚之片)机械性能 | Mechanical Properties of Thin Stainless Steel(Thickness from 0.3mm to 2.9mm) – strip/sheet |
不锈钢片机械性能(301, 304, 631, CSP) | Mechanical Properties of Spring use Stainless Steel |
不锈钢 – 种类,工业标准,化学成份,特点及 主要用途 | Stainless Steel – Type, Industrial Standard, Chemical Composition, Characteristic & end usage of the most commonly used Stainless Steel |
不锈钢薄片用途例 | End Usage of Thinner Gauge |
不锈钢片、板用途例 | Examples of End Usages of Strip, Sheet & Plate |
不锈钢应力退火卷片常用规格名词图解 | General Specification of Tension Annealed Stainless Steel Strips |
耐热不锈钢 | Heat-Resistance Stainless Steel |
镍铬系耐热不锈钢特性、化学成份、及操作温度 | Heat-Resistance Stainless Steel |
铬系耐热钢 | Chrome Heat Resistance Steel |
镍铬耐热钢 | Ni - Cr Heat Resistance Steel |
超耐热钢 | Special Heat Resistance Steel |
抗热超级合金 | Heat Resistance Super Alloy |
耐热不锈钢比重表 | Specific Gravity of Heat – resistance steel plates and sheets stainless steel |
不锈钢材及耐热钢材标准对照表 | Stainless and Heat-Resisting Steels |
发条片 | Power Spring Strip |
发条的分类及材料 | Power Spring Strip Classification and Materials |
上链发条 | Wind-up Spring |
倒后擦发条 | Pull Back Power Spring |
圆面("卜竹")发条 | Convex Spring Strip |
拉尺发条 | Measure Tape |
魔术手环 | Magic Tape |
魔术手环尺寸图 | Drawing of Magic Tap |
定型发条 | Constant Torque Spring |
定型发条及上炼发条的驱动力 | Spring Force of Constant Torque Spring and Wing-up Spring |
定型发条的形状及翻动过程 | Shape and Spring Back of Constant Torque Spring |
定型发条驱动力公式及代号 | The Formula and Symbol of Constant Torque Spring |
边缘处理 | Edge Finish |
硬度 | Hardness |
高碳钢化学成份及用途 | High Carbon Tool Steel, Chemical Composition and Usage |
每公斤发条的长度简易公式 | The Length of 1 Kg of Spring Steel Strip |
每公斤长的重量/公斤(阔100-200公厘) | Weight per one meter long (kg) (Width 100-200mm) |
每公斤之长度(阔100-200公厘) | Length per one kg (Width 100-200mm) |
每公尺长的重量/公斤(阔2.0-10公厘) | Weight per one meter long (kg) (Width 2.0-10mm) |
每公斤之长度(阔2.0-10公厘) | Length per one kg (Width 2.0-10mm) |
高碳钢片 | High Carbon Steel Strip |
分类 | Classification |
用组织结构分类 | Classification According to Grain Structure |
用含碳量分类 – 即低碳钢、中碳钢及高碳钢 | Classification According to Carbon Contains |
弹簧用碳钢片 | CarbonSteel Strip For Spring Use |
冷轧状态 | Cold Rolled Strip |
回火状态 | Annealed Strip |
淬火及回火状态 | Hardened & Tempered Strip/ Precision – Quenched Steel Strip |
贝氏体钢片 | Bainite Steel Strip |
弹簧用碳钢片材之边缘处理 | Edge Finished |
淬火剂 | Quenching Media |
碳钢回火 | Tempering |
回火有低温回火及高温回火 | Low & High Temperature Tempering |
高温回火 | High Temperature Tempering |
退火 | Annealing |
完全退火 | Full Annealing |
扩散退火 | Diffusion Annealing |
低温退火 | Low Temperature Annealing |
中途退火 | Process Annealing |
球化退火 | Spheroidizing Annealing |
光辉退火 | Bright Annealing |
淬火 | Quenching |
时间淬火 | Time Quenching |
奥氏铁孻回火 | Austempering |
马氏铁体淬火 | Marquenching |
高碳钢片用途 | End Usage of High Carbon Steel Strip |
冷轧高碳钢 – 日本工业标准 | Cold-Rolled (Special Steel) Carbon Steel Strip to JIS G3311 |
电镀金属钢片 | Plate Metal Strip |
简介 | General |
电镀金属捆片的优点 | Advantage of Using Plate Metal Strip |
金属捆片电镀层 | Plated Layer of Plated Metal Strip |
镀镍 | Nickel Plated |
镀铬 | Chrome Plated |
镀黄铜 | Brass Plated |
基层金属 | Base Metal of Plated Metal Strip |
低碳钢或铁基层金属 | Iron & Low Carbon as Base Metal |
不锈钢基层金属 | Stainless Steel as Base Metal |
铜基层金属 | Copper as Base Metal |
黄铜基层金属 | Brass as Base Metal |
轴承合金 | Bearing Alloy |
简介 | General |
轴承合金 – 日工标准 JIS H 5401 | Bearing Alloy to JIS H 5401 |
锡基、铅基及锌基轴承合金比较表 | Comparison of Tin base, Lead base and Zinc base alloy for Bearing purpose |
易溶合金 | Fusible Alloy |
焊接合金 | Soldering and Brazing Alloy |
软焊 | Soldering Alloy |
软焊合金 – 日本标准JIS H 4341 | Soldering Alloy to JIS H 4341 |
硬焊 | Brazing Alloy |
其它焊接材料请参阅日工标准目录 | Other Soldering Material |
细线材、枝材、棒材 | Chapter Five Wire, Rod & Bar |
线材/枝材材质分类及制成品 | Classification and End Products of Wire/Rod |
铁线(低碳钢线)日工标准 JIS G 3532 | Low Carbon Steel Wires ( Iron Wire ) to JIS G 3532 |
光线(低碳钢线),火线(退火低碳钢线),铅水线(镀锌低碳钢线)及制造钉用低碳钢线之代号、公差及备注 | Ordinary Low Carbon Steel Wire, Annealed Low Carbon Steel Wire, Galvanized low Carbon Steel Wire & Low Carbon Steel Wire for nail manufacturing - classification, Symbol of Grade, Tolerance and Remarks. |
机械性能 | Mechanical Properites |
锌包层之重量,铜硫酸盐试验之酸洗次数及测试用卷筒直径 | Weight of Zinc-Coating, Number of Dippings in Cupric Sulphate Test and Diameters of Mandrel Used for Coiling Test |
冷冲及冷锻用碳钢线枝 | Carbon Steel Wire Rods for Cold Heading & Cold Forging (to JIS G3507) |
级别,代号及化学成份 | Classification, Symbol of Grade and Chemical Composition |
直径公差,偏圆度及脱碳层的平均深度 | Diameter Tolerance, Ovality and Average Decarburized Layer Depth |
冷拉钢枝材 | Cold Drawn Carbon Steel Shafting Bar |
枝材之美工标准,日工标准,用途及化学成份 | AISI, JIS End Usage and Chemical Composition of Cold Drawn Carbon Steel Shafting Bar |
冷拉钢板重量表 | Cold Drawn Steel Bar Weight Table |
高碳钢线枝 | High Carbon Steel Wire Rod (to JIS G3506) |
冷拉高碳钢线 | Hard Drawn High Carbon Steel Wire |
化学成份分析表 | Chemical Analysis of Wire Rod |
线径、公差及机械性能(日本工业标准 G 3521) | Mechanical Properties (JIS G 3521) (to JIS G3521, ISO-84580-1&2) |
琴线(日本标准 G3522) | Piano Wires ( to G3522) |
级别,代号,扭曲特性及可用之线材直径 | Classes, symbols, twisting characteristic and applied Wire Diameters |
直径,公差及拉力强度 | Diameter, Tolerance and Tensile Strength |
裂纹之容许深度及脱碳层 | Permissible depth of flaw and decarburized layer |
常用的弹簧不锈钢线-编号,特性,表面处理及化学成份 | StainlessSpring Wire – National Standard number, Charateristic, Surface finish & Chemical composition |
弹簧不锈钢线,线径及拉力列表 | Stainless Spring Steel, Wire diameter and Tensile strength of Spring Wire |
处理及表面状况 | Finish & Surface |
各种不锈钢线在不同处理拉力比较表 | Tensile Strength of various kinds of Stainless Steel Wire under Different Finish |
圆径及偏圆度之公差 | Tolerance of Wire Diameters & Ovality |
铬镍不锈钢及抗热钢弹簧线材 –美国材验学会 ASTM A313 – 1987 | Chromium – Nickel Stainless and Heat-resisting Steel Spring Wire – ASTM A313 – 1987 |
化学成份 | Chemical Composition |
机械性能 | Mechanical Properties |
305, 316, 321及347之拉力表 | Tensile Strength Requirements for Types 305, 316, 321 and 347 |
A1S1-302 贰级线材之拉力表 | Tensile Strength of A1S1-302 Wire |
日本工业标准 – 不锈钢的化学成份(先数字后字母排列) | JIS – Chemical Composition of Stainless Steel (in order of number & alphabet) |
美国工业标准 – 不锈钢及防热钢材的化学成份(先数字后字母排列) | AISI – Chemical Composition of Stainless Steel & Heat-Resistant Steel(in order of number & alphabet) |
易车碳钢 | Free Cutting Carbon Steels (to JIS G4804 ) |
化学成份 | Chemical composition |
圆钢枝,方钢枝及六角钢枝之形状及尺寸之公差 | Tolerance on Shape and Dimensions for Round Steel Bar, Square Steel Bar, Hexagonal Steel Bar |
易车(快削)不锈钢 | Free Cutting Stainless Steel |
易车(快削)不锈钢种类 | Type of steel |
易车(快削)不锈钢拉力表 | Tensile Strength of Free Cutting Wires |
枝/棒无芯磨公差表(μ) (μ = 1/100 mm) | Rod/Bar Centreless Grind Tolerance |
易车不锈钢及易车钢之不同尺寸及硬度比较 | Hardness of Different Types & Size of Free Cutting Steel |
扁线、半圆线及异形线 | Flat Wire, Half Round Wire, Shaped Wire and Precision Shaped Fine Wire |
加工方法 | Manufacturing Method |
应用材料 | Material Used |
特点 | Characteristic |
用途 | End Usages |
不锈钢扁线及半圆线常用材料 | Commonly used materials for Stainless Flat Wire & Half Round Wire |
扁线公差 | Flat Wire Tolerance |
方线公差 | Square Wire Tolerance |
联系客服